User's Manual Part 2

97D-Link DIR-652 User Manual
Section 6 - Troubleshooting
Ŗ%QPſIWTG[QWT+PVGTPGVUGVVKPIU
Ŗ)QVQStart > Settings > Control Panel. Double-click the )NTERNET/PTIONS Icon. From the Security tab, click
the button to restore the settings to their defaults.
Ŗ%NKEMVJGConnection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings
button. Make sure nothing is checked. Click OK.
Ŗ)QVQVJGAdvanced tab and click the button to restore these settings to their defaults. Click OK three
times.
Ŗ%NQUG[QWTYGDDTQYUGTKHQRGPCPFQRGPKV
Ŗ#EEGUUVJGYGDOCPCIGOGPV1RGP[QWTYGDDTQYUGTCPFGPVGTVJG+2CFFTGUUQH[QWT&.KPMTQWVGTKPVJGCFFTGUU
bar. This should open the login page for your the web management.
Ŗ+H[QWUVKNNECPPQVCEEGUUVJGEQPſIWTCVKQPWPRNWIVJGRQYGTVQVJGTQWVGTHQTUGEQPFUCPFRNWIDCEMKP9CKV
CDQWVUGEQPFUCPFVT[CEEGUUKPIVJGEQPſIWTCVKQP+H[QWJCXGOWNVKRNGEQORWVGTUVT[EQPPGEVKPIWUKPICFKHHGTGPV
computer.
7HATCAN)DOIF)FORGOTMYPASSWORD
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back
to the factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a
paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process.
Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is
admin and leave the password box empty.