User's Manual

102D-Link DIR-808L User Manual
Section 3 - Conguration
IPv6 Routing
Tick the box next to the route you wish to enable.
Enter a specic name to identify this route.
This is the IP address of the router used to reach the specied
destination or enter the IPv6 address prex length of the
packets that will take this route.
Enter the metric value for this rule here.
Use the drop-down menu to specify if the IP packet must use
the WAN or LAN interface to transit out of the router.
Enter the next hop that will be taken if this route is used.
Checkbox:
Name:
Destination IP/
Prex Length:
Metric:
Interface:
Gateway:
This page allows you to specify custom routes that determine how data is moved around your network.