User's Manual

105D-Link DIR-808L User Manual
Section 3 - Conguration
Time
Displays the current date and time of the router.
Select your time zone from the drop-down menu.
To select Daylight Saving time manually, select enabled or
disabled, and enter a start date and an end date for daylight
saving time.
NTP is short for Network Time Protocol. A NTP server will
synchronize the time and date with your router. This will only
connect to a server on the Internet, not a local server. Check
the box to enable this feature.
Enter the IP address of a NTP server or select one from the
drop-down menu.
To manually input the time, enter the values in these elds for
the Year, Month, Day, Hour, Minute, and Second and then click
Set Time.
Note: You can also click Copy Your Computer’s Time Settings
to sync the date and time with the computer you are currently
on.
Current Router
Time:
Time Zone:
Enable Daylight
Saving:
Enable NTP
Server:
NTP Server Used:
Date and Time:
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the time server. Daylight Saving can also be congured to
automatically adjust the time when needed.