User's Manual

10D-Link DIR-808L User Manual

Section 2 - Installation

4. Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled

INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.

5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.

6. Connect the supplied power adaptor into the power port on the back of the router and then plug it into a power

outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the

router to boot up.

7. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online

already. Try opening a web browser and enter a web site. A solid light on the Internet LED indicates connection

on the Internet port and the router can connect to the Internet. If the LED is orange, a connection is present but

the router cannot connect to the Internet.

INTERNET

LAN

RESET

INTERNET1234

12V 1A

POWER

WPS

DIR-808L

Modem

Computer