User's Manual

24D-Link DIR-808L User Manual
Section 3 - Conguration
Step 3: Internet Connection (Dynamic IP Address)
After selecting the Dynamic IP Address Internet connection method, the following page will appear.
The following parameters will be available for conguration:
MAC Address:
Enter the MAC address of the Internet gateway (plugged
into the Internet port of this device) here.
Copy Button:
If the conguration PC also acts as the Internet gate-
way, then click on the Copy Your PC’s MAC Address
button to copy the PC’s MAC address into the space
provided. If you’re not sure, leave the MAC address
eld blank.
Host Name:
Enter the host name used here. You may also need to
provide a host name. If you do not have or know this
information, please contact your ISP.
Click Next to continue.
Step 3: Internet Connection (PPPoE)
After selecting the PPPoE Internet connection method, the following page will appear:
The following parameters will be available for conguration:
Address Mode:
Choose the IP address mode for your PPPoE connection.
IP Address:
If you are using Static PPPoE, enter the IP address
provided by your ISP.
User Name:
Enter the PPPoE account user name used here. This
information is given by the ISP.
Password:
Enter the PPPoE account password used here. This
information is given by the ISP.
Service Name:
You may be required to enter a service name by your
ISP.