User's Manual

25D-Link DIR-808L User Manual
Section 3 - Conguration
Step 3: Internet Connection (PPTP)
After selecting the PPTP Internet connection method, the following page will appear:
The following parameters will be available for conguration:
Address Mode: Here the user can specify whether this Internet
connection requires the use of a dynamic or static IP
address. PPTP usually requires a dynamic IP conguration.
PPTP IP Address: Enter the PPTP IP address used here. This option is only
available if Static IP is selected.
PPTP Subnet Mask: Enter the PPTP subnet mask used here.
PPTP Gateway IP Address: Enter the PPTP gateway IP address used here.
PPTP Server IP Address: Enter the PPTP server IP address used here. This is
normally the same a the PPTP gateway IP address.
User Name: Enter the PPTP username used here.
Password: Enter the PPTP password used here.
Verify Password: Re-enter the PPTP password used here.
Click Next to continue.