User's Manual

26D-Link DIR-808L User Manual
Section 3 - Conguration
Step 3: Internet Connection (L2TP)
After selecting the L2TP Internet connection method, the following page will appear:
The following parameters will be available for conguration:
Address Mode: Here the user can specify whether this Internet
connection requires the use of a dynamic or static IP
address. L2TP usual requires a dynamic IP conguration.
L2TP IP Address: Enter the L2TP IP address used here. This option is
only available if Static IP is selected.
L2TP Subnet Mask: Enter the L2TP subnet mask used here.
L2TP Gateway IP Address: Enter the L2TP gateway IP address used here.
L2TP Server IP Address: Enter the L2TP server IP address used here. This is
normally the same a the L2TP gateway IP address.
User Name: Enter the L2TP username used here.
Password: Enter the L2TP password used here.
Verify Password: Re-enter the L2TP password used here.
Click Next to continue.