User's Manual
46D-Link DIR-808L User Manual
Section 3 - Conguration
The following parameters will be available for conguration:
Wireless Band: Displays the wireless band being congured. The following
conguration relates to the 2.4 GHz band.
Enable Wireless: Tick the box to enable the wireless function. Select Always
from the drop-down menu to enable wireless at all times. If
you do not want to use wireless, uncheck the box to disable
all wireless functions. To set a schedule for the times when
you want the wireless network to be available, click on the
Add New button to specify a new schedule.
Wireless Network Name: The Service Set Identier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The SSID is
case-sensitive.
802.11 Mode: Here you can manually select the preferred wireless standard
to use for this wireless network. You should select the 802.11
mode according to the capabilities of the wireless clients/
devices which will be accessing this network. If only 802.11n
devices will be accessing your network, it is recommended to
set the 802.11 mode to 802.11n only.
Enable Auto Channel Scan: The auto channel selection setting can be selected to allow
this device to choose the wireless channel with the least
amount of interference.
Wireless Channel: If auto channel scan is disabled, you can select your preferred
wireless channel. By default the channel is set to 1. The channel
can be changed to t the channel setting for an existing wire-
less network or to customize the wireless network.
Transmission Rate: Select the transmission rate. It is strongly suggested that Best
(Automatic) is selected for best performance.
Manual Setup - 2.4 Ghz Band