User's Manual

70D-Link DIR-808L User Manual
Section 3 - Conguration
Static IPv6
Select Static IPv6 from the drop-down menu.
Tick this box to use the link-local address as the IPv6 address.
If you did no tick the box above, enter the IPv6 address provided
to you by your Internet Service Provider (ISP).
Enter the subnet prex length specied by your ISP.
Enter the default gateway provided by your ISP.
Enter the primary DNS server provided by your ISP.
Enter the secondary DNS server provided by your ISP.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Tick to enable the automatic assignment of IPv6 addresses to
computers on your network.
Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC +
Stateless DHCPv6.
If you selected Stateful (DHCPv6) above, enter the start IPv6
address for the DHCPv6 range for your local computers.
If you selected Stateful (DHCPv6) above, enter the end IPv6
address for the DHCPv6 range for your local computers.
Enter the IPv6 address lifetime (in minutes).
My IPv6 Connection:
Use Link-Local Address:
IPv6 Address:
Subnet Prex Length:
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Automatic IPv6
address assignment:
Autoconguration Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
IPv6 Address Lifetime: