User's Manual

74D-Link DIR-808L User Manual
Section 3 - Conguration
IPv6 in IPv4 Tunneling
Select IPv6 in IPv4 Tunnel from the drop-down menu.
Enter the remote and local IPv4 and IPv6 settings supplied by
your Internet Service Provider (ISP).
Select Obtain a DNS server address automatically, or Use
the following IPv6 DNS servers. If you chose to use IPv6 DNS
servers, enter the primary and secondary DNS server addresses
provided to you by your ISP.
Tick to enable DHCP-PD.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN Link-Local Address.
Tick to enable the automatic assignment of IPv6 addresses to
computers on your network.
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6.
If you selected Stateful (DHCPv6) above, enter the start IPv6
address for the DHCPv6 range for your local computers.
If you selected Stateful (DHCPv6) above, enter the end IPv6
address for the DHCPv6 range for your local computers.
Enter the router advertisement lifetime (in minutes).
My IPv6
Connection is:
IPv6 in IPv4
Tunnel Settings:
IPv6 DNS Settings:
LAN IPv6 Address:
Enable DHCP-PD:
LAN IPv6 Address
LAN IPv6 Link-
Local Address:
Enable Automatic
IPv6 address
assignment:
Autoconguration
Type:
IPv6 Address
Range Start:
IPv6 Address
Range End:
IPv6 Address
Lifetime: