User's Manual

86D-Link DIR-808L User Manual
Section 3 - Conguration
The following parameters will be available for conguration:
Checkbox: Tick this option to enable the rule specied.
Name: Enter a custom name for the rule being created here. This
name is used for identication.
Priority: Select the appropriate priority requirement by entering a
value between 1 and 255 in the box provided.
Protocol: Select the protocol used for the application for in the drop-
down menu and it will automatically place it in the Protocol
eld.
Local IP Range: Enter the local IP range used here. This is the IP range of your
Local Area Network. The router’s IP cannot be included in this
range.
Remote IP Range: Enter the remote IP range used here. This is the IP range of
the public network from the Internet port side. To apply this
rule to any IP addresses from the public side, enter the range
0.0.0.1 to 255.255.255.254.
Local Port Range: Enter the local port range to be used for this rule.
Remote Port Range: Enter the remote port range to be used for this rule.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
trac control and data priority manipulation.