User's Manual

96D-Link DIR-815 User Manual
Section 4 - Security
Congure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
XJSFMFTTDPOOFDUJWJUZCFGPSFFOBCMJOHFODSZQUJPO:PVSXJSFMFTTTJHOBMNBZEFHSBEFXIFOFOBCMJOHFODSZQUJPOEVFUPUIF
added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the router (192.168.0.1).
2Click on Setup and then click Wireless Settings on the left side.
3. Click the Manual Wireless Connection Setup button.
4. Next to Security Mode, select Enable WEP Wireless Security (basic).
5. Next to WEP Encryption, select 64bit orCJU.
6. Next to Default WEP Key, select the WEP key you would like to use
as the default WEP key. The available options are WEP Key 1, WEP
,FZ, WEP Key 3, or 8&1,FZ
7. Enter the WEP key you would like to use in the WEP Key eld.
8. Click Save Settings to save your settings. If you are conguring the router with a wireless adapter, you will lose connectivity
until you enable WEP on your adapter and enter the same WEP key as you did on the router.