User's Manual

51D-Link DIR-815 User Manual
Section 3 - Conguration
Check the box on the left side to enable the Application
Rule.
&OUFS B OBNF GPS UIF SVMF :PV NBZ TFMFDU B
pre-dened application from the Application
drop-down
menu and click <<.
This is the port used to trigger the application. It can be
either a single port or a range of ports.
Select the protocol of the trigger port (TCP, UDP, or All).
This is the port number on the Internet side that will be
VTFEUPBDDFTTUIFBQQMJDBUJPO:PVNBZEFöOFBTJOHMFQPSU
PSBSBOHFPGQPSUT:PVDBOVTFBDPNNBUPBEENVMUJQMF
ports or port ranges.
Select the protocol of the rewall port (TCP, UDP, or All).
The schedule of time when the Application Rule will be
enabled. The schedule may be set to Always, which will
BMMPXUIFQBSUJDVMBSTFSWJDFUPBMXBZTCFFOBCMFE:PVDBO
create your own times in the Tools > Schedules section.
&OBCMF$IFDLCPY
Name:
Trigger:
Trac Type:
Firewall:
Trac Type:
Schedule:
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have diculties working through NAT (Network Address Translation). Special Applications makes some of
these applications work with the DIR-815. If you need to run applications that require multiple connections, specify the port
normally associated with an application in the “Trigger Port” eld, select the protocol type as TCP or UDP, then enter the rewall
(public) ports associated with the trigger port to open them for inbound trac.
Click the Save Settings button to save any changes made.