User's Manual

53D-Link DIR-815 User Manual
Section 3 - Conguration
Network Filter
Select Turn MAC Filtering OFF, Turn MAC Filtering ON and
ALLOW computers listed to access the network, or Turn
MAC Filtering ON and DENY computers listed to access
the network from the drop-down menu.
Check the box on the left side to enable the Network Filter.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer to the
Networking Basics section in this manual.
Select a DHCP client from the Computer Name drop-down
menu and click << to copy that MAC Address.
The schedule of time when the Network Filter will be
enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. Click
the New Schedule button to create your own times in the
Tools > Schedules section.
Congure MAC
Filtering:
&OBCMF$IFDLCPY
MAC Address:
DHCP Client List:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
BDDFTTJOHUIFOFUXPSL:PVDBOFJUIFSNBOVBMMZBEEB."$BEESFTTPSTFMFDUUIF."$BEESFTTGSPNUIFMJTUPGDMJFOUTUIBUBSF
currently connected to the Broadband Router.
Click the Save Settings button to save any changes made.