User's Manual

97D-Link DIR-819 User Manual
Section 3 - Conguration
Save Settings Don’t Save Settings
Advanced Network
ADVANCED NETWORK SETTINGSADVANCED NETWORK
DIR-819
ADVANCED
Click Advanced Network on the navigation menu to congure the Advanced Wireless
settings. This page allows for the conguration of miscillaneous settings. When you are
satised with your conguration, click Save Settings.
Enable UPnP IGD: Click Enable to use the UPnP feature. UPnP provides compatibility
with networking equipment, software, and peripherals.
UPNP
ADVANCED NETWORK SETTINGS
These options are for users that wish to change the LAN settings. We do not recommend changing these settings from factory default.
Changing these settings may affect the behavior of your network.
Save Settings Don’t Save Settings
UPNP
Universal Plug and Play(UPnP) supports peer-to-peer Plug and Play functionality for network devices.
Enable UPnP IGD :
☐
WAN PING
If you enable this feature, the WAN port of your router will respond to ping requests from the Internet that are sent to the WAN IP
Address.
Enable WAN Ping Response :
☐
WAN PORT SPEED
WAN Port Speed : Auto 10/100Mbps
▼
MULTICAST STREAMS
Enable Multicast Streams :
☐
IPV6 MULTICAST STREAMS
Enable IPv6 Multicast Streams :
☐
Enable WAN Ping
Response:
Enable or disable the router to reply to pings.
WAN PING
WAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100 Mbps,
or Auto 10/100Mbps. Using Auto 10/100Mbps is recommended.
WAN PORT SPEED
Enable Multicast
Streams:
Enable to allow IPv4 multicast trac to pass through the router from
the Internet.
MULTICAST STREAMS
Enable IPv6
Multicast Streams:
Enable to allow IPv6 multicast trac to pass through the router from
the Internet.
Click the Save Settings button when you are nished.
IPV6 MULTICAST STREAMS