User's Manual

99D-Link DIR-819 User Manual
Section 3 - Conguration
Save Settings Don’t Save Settings
IPv6 Firewall
IPV6 FIREWALLIPV6 FIREWALL
DIR-819
ADVANCED
Click IPv6 Firewall on the navigation menu to congure the IPv6 Firewall Settings. When
you are satised with your conguration, click Save Settings.
Enable IPv6 Simple
Security:
Enable or disable the IPv6 rewall.
IPV6 SIMPLE SECURITY
Congure IPv6
Filtering below:
Select the function of the IPv6 Filter, the options are Turn IPv6
Filtering OFF, Turn IPv6 Filtering ON and ALLOW rules listed, Turn
IPv6 Filtering ON and DENY rules listed.
Enable: Check the box to enable this rule.
Name: Enter a name for the rule.
Schedule: Select the schedule from the drop-down menu. The default is Always.
Refer to Schedules on page 110 for more information on creating
new schedules.
Source Interface: Select the source interface, WAN or LAN, from the drop down menu.
Source IP Address /
PrexLength:
Enter the source IP address and specify the prex length for the rule.
Protocol: Select the protocol to apply the rule to, either ALL, TCP, UDP, or ICMP.
Destination
Interface:
Select the destination interface, WAN or LAN, from the drop down
menu.
20  IPV6 FIREWALL RULES
IPV6 FIREWALL
The rewall settings section is an advance feature used to allow or deny trafc from passing through the device. It works in the same
way as IP Filters with additional settings. You can create more detailed rules for the device.
Save Settings Don’t Save Settings
20 -- IPV6 FIREWALL RULES
Remaining number of rules that can be created: 24
Congure IPv6 Filtering below:
Turn IPv6 Filtering OFF
▼
Turn IPv6 Filtering ON and ALLOW rules listed
Turn IPv6 Filtering ON and DENY rules listed
☐
Name
Schedule
Always
▼
Source
Interface
LAN
▼
IP Address /PrexLength
Protocol
ALL
▼
Dest
Interface
LAN
▼
IP Address /PrexLength
Port Range
~
IPV6 SIMPLE SECURITY
Enable IPv6 Simple Security :
☐