User's Manual

100D-Link DIR-819 User Manual
Section 3 - Conguration
Destination
IP Address /
PrexLength:
Enter the destination IP address and specify the prex length for the
rule.
Port Range: Enter the port range to apply the rule to. If the protocol is set as ALL
or ICMP this feature is disabled.
Click the Save Settings button when you are nished.
Save Settings Don’t Save Settings
IPV6 FIREWALLIPV6 FIREWALL
DIR-819
ADVANCED
IPV6 FIREWALL
The rewall settings section is an advance feature used to allow or deny trafc from passing through the device. It works in the same
way as IP Filters with additional settings. You can create more detailed rules for the device.
Save Settings Don’t Save Settings
20 -- IPV6 FIREWALL RULES
Remaining number of rules that can be created: 24
Congure IPv6 Filtering below:
Turn IPv6 Filtering OFF
▼
Turn IPv6 Filtering ON and ALLOW rules listed
Turn IPv6 Filtering ON and DENY rules listed
☐
Name
Schedule
Always
▼
Source
Interface
LAN
▼
IP Address /PrexLength
Protocol
LAN
▼
Dest
Interface
LAN
▼
IP Address /PrexLength
Port Range
~
IPV6 SIMPLE SECURITY
Enable IPv6 Simple Security :
☐
IPv6 Firewall (continued)