User's Manual

26D-Link DIR-819 User Manual
Section 3 - Conguration
If you choose DHCP Connection (Dynamic IP Address) as your Internet Connection, enter your IP address, congure the following settings:
DHCP CONNECTION (DYNAMIC IP ADDRESS)
To set up this connection, please make sure that you are connected to the D-Link Router with the PC that was originally
connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer’s MAC
Address to the D-Link Router.
MAC Address :
(optional)
Clone Your PC’s MAC Address
Host Name : dlinkrouter
Note: You may also need to provide a Host Name.If you do not have or know this information, please contact your ISP.
DNS SETTINGS
Primary DNS Address :
Secondary DNS Address :
(optional)
Prev Next Cancel Connect
MAC Address: If your Internet connection is tied to a specic PC or hardware, enter
it manually or click Clone Your PC’s MAC Address.
Host Name: Enter the host name of the router.
DHCP CONNECTION DYNAMIC IP ADDRESS
Primary DNS
Server:
Enter the primary DNS server IP addresses.
Secondary DNS
Server :
Enter the secondary DNS server IP addresses.
Click Next to continue.
DNS SETTINGS
Click Connect to nish the setup.
SETUP COMPLETE!
SETUP COMPLETE!
The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings.
Prev Next Cancel Connect
DHCP
Internet Connection Setup Wizard (continued)