User's Manual

54D-Link DIR-819 User Manual
Section 3 - Conguration
Network Settings
NETWORK SETTINGSNETWORK SETTINGS
DIR-819
SETUP
Click Network Settings on the navigation menu to congure your local network settings.
When you are satised with your conguration, click Save Settings.
Router IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1.
If you change the IP address, once you click Save Settings, you will
need to enter the new IP address in your browser to get back into
the conguration utility.
Default Subnet
Mask:
Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Host Name: The default address to access the router’s configuration is
http://dlinkrouter.local./ Here, you can replace dlinkrouter with a
name of your choice.
Local Domain
Name:
Enter the domain name (optional).
Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use the router for a DNS
server.
ROUTER SETTINGS
NETWORK SETTINGS
Use this section to congure the internal network settings of your router and also to congure the built-in DHCP server to assign IP
addresses to computers on your network.The IP address that is congured here is the IP address that you use to access the Web-
based management interface.If you change the IP address in this section, you may need to adjust your PC's network settings to access
the network again.
Please note that this section is optional and you do not need to change any of the settings here to get your network up and running.
Save Settings Don’t Save Settings
DHCP RESERVATIONS LIST
Enable Host Name IP Address
NUMBER OF DYNAMIC DHCP CLIENTS
Host Name IP Address MAC Address Expired Time
ROUTER SETTINGS
Use this section to congure the internal network settings of your router.The IP address that is congured here is the IP address that
you use to access the Web-based management interface.If you change the IP address here, you may need to adjust your PC’s network
settings to access the network again.
Router IP Address: 192.168.0.1
Default Subnet Mask : 255.255.255.0
Host Name : dlinkrouter
Local Domain Name : (optional)
Enable DNS Relay :
☑
ADD DHCP RESERVATION
Enable :
☐
Computer Name :
<<
Computer Name
▼
IP Address :
MAC Address :
Clone Your PC’s MAC Address
Add / Update Clear
DHCP SERVER SETTINGS
Use this section to congure the built-in DHCP server to assign IP address to the computers on your network.
Enable DHCP Server :
☑
DHCP IP Address Range : 100 to 200 (addresses within the LAN subnet)
DHCP Lease Time : 10080 (minutes)
Always broadcast :
☐
(compatibility for some DHCP Clients)
Save Settings Don’t Save Settings
Enable DHCP
Server:
Enable or disable the DHCP server.
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conict.
DHCP SERVER SETTINGS