User's Manual

84D-Link DIR-819 User Manual
Section 3 - Conguration
Enable: Check the box to enable this rule.
Name: Enter a name for this QoS rule.
Queue ID: Select the queue to apply this rule to.
Protocol: Select the protocol to apply the rule to: TCP, UDP, or All.
Classify: Select to apply the rule to Upstream or Downstream trac.
Local IP Range: If you selected Upstream as the Classify type, enter the local IP
Range, excluding the router IP and broadcast IP, to apply this rule to.
For example 192.168.0.2 to 192.168.0.254.
Application Port: Enter the port range you wish to apply this rule to. Use the Application
Name dropdown menu and the << button to quickly select an
application. The protocol, and port range are automatically populated.
Remote IP Range: If you selected Downstream as the Classify type, enter the Remote
IP Range, excluding the router IP and broadcast IP, to apply this rule
to. For example 192.168.0.2 to 192.168.0.254.
32  ADD CLASSIFICATION RULE
The currently dened QoS rules are listed here.
Click the Save Settings button when you are nished.
CLASSIFICATION RULES
QOS Engine (continued)
QOS SETTINGSQOS ENGINE
DIR-819
ADVANCED
QOS SETTINGS
Use this section to congure D-Link's QoS Engine powered by QoS Engine Technology. This QoS Engine improves your online gaming
experience by ensuring that your game trafc is prioritized over other network trafc, such as FTP or Web.For best performance, use
the Automatic Classication option to automatically set the priority for your applications.
Save Settings Don’t Save Settings
CLASSIFICATION RULES
Enable Name Queue ID Protocol Classify
Application
Port
Remote
IP Range
Local IP
Range
QOS SETUP
Enable Qos :
☐
Uplink Speed : 0
kbps <<
Select Transmission Rate
▼
Downlink Speed :
0
kbps << Select Transmission Rate
▼
Queue Type :
 Strict Priority Queue  Weighted Fair Queue
Queue ID Queue Priority
1 Highest
2 Higher
3 Normal
4 Best Effort(default)
32 -- ADD CLASSIFICATION RULE
Enable :
☐
Name :
Queue ID : 1 - Highest
▼
Protocol : ALL
▼
Classify : Upstream
▼
Local IP Range : Local IP Start Local IP End
to
Application Port : Application Name
▼
>> to
Remote IP Range : Remote IP Start Remote IP End
to
Add Cancel
Save Settings Don’t Save Settings