User's Manual

88D-Link DIR-819 User Manual
Section 3 - Conguration
Add Policy
ADD NEW POLICY
This wizard will guide you through the following steps to add a new policy for Access Control.
Step 1 - Choose a unique name for your policy
Step 2 - Select a schedule
Step 3 - Select the machine to which this policy applies
Step 4 - Select ltering method
Step 5 - Select lters
Step 6 - Congure Web Access Logging
Prev Next Save Cancel
Click Next to begin the add policy wizard.
ADD NEW POLICY
STEP 1: CHOOSE POLICY NAME
Choose a unique name for your policy.
Policy Name :
Prev Next Save Cancel
Policy Name : Enter a name for your policy.
Click Next to continue.
STEP 1: CHOOSE POLICY NAME
STEP 2: SELECT SCHEDULE
Choose a schedule to apply to this policy.
Always
▼
Details : Always
Prev Next Save Cancel
Details: Select a schedule from the drop-down menu. The default is Always.
Refer to Schedules on page 110 for more information on creating
new schedules.
Click Next to continue.
STEP 2: SELECT SCHEDULE
STEP 3: SELECT MACHINE
Select the machine to which this policy applies.
Specify a machine with its IP or MAC address.
Address Type :
 IP  MAC
IP Address :
<<
Computer Name
▼
Machine Addres :
<<
Computer Name
▼
Clone Your PC’s MAC Address
Add Cancel
Machine
Prev Next Save Cancel
Address Type: Choose whether this policy is applied by IP or MAC address.
IP Address: If you select IP as the address type, enter the IP address of the device
you wish to apply the policy to or use the Computer Name dropdown
menu to quickly select a computer. The IP address is automatically
populated.
STEP 3: SELECT MACHINE