Version 1.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date 1.00 February 4, 2016 Description Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Table of Contents Product Overview .............................................................. 1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features............................................................................................
Table of Contents Quick VPN .........................................................................88 Important Information .............................................................89 Quick VPN Server Setup Instructions ..................................90 iOS Devices ...................................................................................91 Mac OS X ........................................................................................95 Windows 7.........................................
Section 1 - Product Overview Product PackageOverview Contents DIR-882 Ethernet Cable :L )L &RQ¿JXUDWLRQ 1RWH Wi-Fi Configuration Card Quick Installation Guide Power Adapter If any of the above items are missing or damaged, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-882 will cause damage and void the warranty for this product.
Section 1 - Product Overview System Requirements Network Requirements t "O &UIFSOFU CBTFE DBCMF PS %4- NPEFN t *&&& BD O H C B XJSFMFTT DMJFOUT t &UIFSOFU Computer with the following: t 8JOEPXT¥ .
Section 1 - Product Overview Introduction The D-Link DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router shares your Internet connection over a blazing-fast Gigabit Wireless AC connection of up to 1900 Mbps (Up to 1300 Mbps 5 GHz Wireless AC and up to 600 Mbps 2.4 GHz Wireless N)1, using advanced AC beamforming technology to significantly outperform 802.11n and other 802.11ac devices.
Section 1 - Product Overview Introduction (continued) network or the Internet. Support for WPA™ and WPA2™ standards ensure that you will be able to use the best possible encryption regardless of your client devices. In addition, this router is equipped with a dual-active firewall (SPI and NAT) to prevent potential attacks over the Internet. The DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router provides incredible speeds, smart antenna technology, fast ports, cloud features, and terrific security features.
Section 1 - Product Overview Features t 4VQFSJPS 8JSFMFTT /FUXPSLJOH - The DIR-882 provides Gigabit wireless speeds of up to a combined 1900 Mbps (1300 Mbps 802.11ac 5 GHz, plus 600 Mbps 802.11n 2.4 GHz)1. This capability rivals wired connections, allowing users to participate in real-time activities online, such as HD video communication, online gaming, and use mobile devices from anywhere in your home while still offering full 802.11n/g/b backward compatibility.
Section 1 - Product Overview Hardware Overview LED Indicator 1 1 1PXFS -&% 2 *OUFSOFU -&% 3 4 8JSFMFTT ()[ -&% 8JSFMFTT ()[ -&% D-Link DIR-882 User Manual 2 3 4 A solid light indicates a proper connection to the power supply. The light will be a solid orange during boot up. A solid light indicates connection on the Internet port. If the LED is orange, the router cannot connect to the Internet. A solid light indicates that the 2.4 GHz wireless band is enabled.
Section 1 - Product Overview Hardware Overview Back Panel 1 2 3 4 5 6 7 1 (JHBCJU -"/ 1PSUT 2 (JHBCJU 8"/ 1PSU 3 Reset Button Insert a paperclip in the hole, wait for 10 seconds, and release to reset the router to default settings. 4 WPS Button Press to start the WPS process and automatically create a secure connection to a WPS client. 5 8J 'J #VUUPO Press this button turn off or turn on the wireless networks.
Section 3 - Installation Installation This section will walk you through the installation of the DIR-882. Before you Begin t 1MBDFNFOU PG UIF SPVUFS JT WFSZ JNQPSUBOU %P OPU QMBDF UIF SPVUFS JO BO FODMPTFE BSFB TVDI BT B DMPTFU DBCJOFU attic, or garage. t $POöHVSF UIF SPVUFS XJUI UIF DPNQVUFS UIBU XBT MBTU DPOOFDUFE EJSFDUMZ UP ZPVS *OUFSOFU DPOOFDUJPO 7FSJGZ UIBU JU is connected to the Internet before connecting additional devices.
Section 3 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Section 3 - Installation Hardware Setup 1. The DIR-882 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas into a 115 degree angle to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage. 115° 2. Position your DIR-882 near your Internet-connected modem. Place it in an open area for better wireless coverage. Modem DIR-882 3.
Section 3 - Installation 4. Use the included Ethernet cable to connect your modem to the yellow port labeled */5&3/&5 on the router. Modem DIR-882 5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward. Modem DIR-882 6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid white.
Section 3 - Installation 7. If you are configuring the DIR-882 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label attached to the bottom your router.
Section 3 - Installation Completing Setup There are several different ways you can configure your router to connect to the Internet and connect to your clients: t 234 .PCJMF "QQ - Use your Android device, iPhone, iPad, or iPod touch to configure your router. Refer to 234 .PCJMF "QQ on page 14. t % -JOL 4FUVQ 8J[BSE - This wizard will launch when you log into the router for the first time. Refer to 4FUVQ 8J[BSE on page 19. t Manual Setup - Log in to the router and manually configure your router.
Section 3 - Installation QRS Mobile App QRS Mobile app allows you to install and configure your router from your mobile device. Note: The screenshots may be different depending on your mobile device’s OS version. Step 1 Search for the free 234 .PCJMF "QQ on the App Store or Google Play. Step 2 Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card.
Section 3 - Installation QRS Mobile App (continued) Step 4 You will see the welcome screen. Tap Start to proceed, then enter your device password and tap -PH *O. Tap /FYU once the Operation Mode screen appears. Step 5 At this point, please ensure that your router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked */5&3/&5 on the DIR-882.
Section 3 - Installation QRS Mobile App (continued) Step 6 You will be asked to configure your 2.4 GHz wireless network. Enter a network name (SSID) of your choice, or leave it unchanged to accept the default SSID. Next, choose a Wi-Fi password of at least 8 characters. Any device trying to connect to the router wirelessly will need to enter this password the first time it connects. Tap /FYU to configure your 5 GHz wireless network. When satisfied, tap /FYU to proceed.
Section 3 - Installation QRS Mobile App (continued) Step 8 If you wish to receive push notifications whenever a new firmware update is available, check the Notify me when new firmware is available box and tap /FYU. Otherwise, just tap /FYU to proceed. Step 9 You will be presented with a summary of your chosen settings. Tap Save to complete the setup.
Section 3 - Installation QRS Mobile App (continued) Congratulations, your device has been successfully configured! You can share this information by tapping 4IBSF #Z & NBJM, or tap 'JOJTI to exit the app.
Section 3 - Installation Setup Wizard If this is your first time installing the router, open your web browser and enter IUUQ EMJOLSPVUFS MPDBM in the address bar. Alternatively, enter the IP address of the router (default: IUUQ ). The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click /FYU to continue. Please wait while your router detects your Internet connection type.
Section 3 - Installation Setup Wizard (continued) If the router detected or you selected 111P&, enter your PPPoE username and password and click /FYU to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click /FYU to continue.
Section 3 - Installation Setup Wizard (continued) Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click /FYU to continue. Note: The DIR-882's Smart Connect feature presents a single wireless network. When connecting clients to an extension network, they will be automatically added to the best band, either 2.4 GHz or 5 GHz.
Section 3 - Installation Setup Wizard (continued) You will be presented with a summary of your settings. Click /FYU to finalize the settings or Back to make changes. At the end of the wizard, you will be presented with a final summary of your settings. Click 'JOJTI to close the wizard.
Section 4 - Configuration Configuration To access the configuration utility, open a web-browser such as Internet Explorer and enter IUUQ EMJOLSPVUFS MPDBM or you may also connect by typing the IP address of the router (by default this is IUUQ ) in the address bar. Enter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click -PH *O to proceed.
Section 4 - Configuration Home The Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages. The Home page displays whether or not the router is currently connected to the Internet.
Section 4 - Configuration DIR-882 Click on the DIR-882 icon to view details about the router and its wireless settings. Here you can see the router’s current Wi-Fi network name and password, as well as the router's MAC address, IPv4 address, and IPv6 address. To reconfigure the network settings, either click Go to settings on the lower left, or click Settings (at the top of the page) and then Network on the menu that appears. Refer to Network on page 63 for more information.
Section 4 - Configuration Connected Clients Click on the Connected Clients icon to view details about the router and its wireless settings. On this page you can see all the clients currently connected to the router, and their IP addresses. To edit each client’s settings, click the pencil icon on the client you want to edit. Name: Enter a custom name for this client. Vendor: Displays the vendor of the device. MAC Address: Displays the MAC address of the device.
Section 4 - Configuration Settings Wizard In the Settings menu on the bar on the top of the page, click 8J[BSE to open the setup wizard. This is the same wizard that appears when you start the router for the first time. Refer to 4FUVQ 8J[BSE on page 19 for details. Internet In the Settings menu on the bar on the top of the page, click Internet to see the Internet configuration options. My Internet Choose your Internet connection type from the drop-down menu.
Section 4 - Configuration Dynamic IP (DHCP) Select %ZOBNJD *1 %)$1 to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use. Advanced Settings Host Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Enter the primary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP.
Section 4 - Configuration Static IP Select Static IP if your IP information is provided by your Internet Service Provider (ISP). IP Address: Enter the IP address provided by your ISP. Subnet Mask: Enter the subnet mask provided by your ISP. Default Gateway: Enter the default gateway address provided by your ISP. Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Advanced Settings Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Section 4 - Configuration PPPoE Select 111P& if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either "MXBZT PO, On Demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet connection is Time: maintained during inactivity. To disable this feature, select "MXBZT on as the reconnect mode.
Section 4 - Configuration PPPoE (continued) MAC Address The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Static IP IP Address: Enter the IP address provided by your ISP (Static IP only). Service Name: Enter the ISP service name (optional). Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Section 4 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP Server IP Enter the PPTP server IP address provided by your ISP. Address: Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either "MXBZT PO, On demand, or Manual.
Section 4 - Configuration PPTP (continued) Static IP PPTP IP Address: Enter the IP address provided by your ISP (Static IP only). PPTP Subnet Enter the subnet mask provided by your ISP (Static IP only). Mask: PPTP Gateway IP Enter the gateway IP address provided by your ISP (Static IP only). Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Section 4 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP Server: Enter the L2TP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either "MXBZT PO, On demand, or Manual.
Section 4 - Configuration L2TP (continued) Static IP L2TP IP Address: Enter the IP address provided by your ISP (Static IP only). L2TP Subnet Enter the subnet mask provided by your ISP (Static IP only). Mask: L2TP Gateway IP Enter the gateway IP address provided by your ISP (Static IP only). Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Section 4 - Configuration DS-Lite DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration: Advanced Settings DS-Lite Select %4 -JUF %)$1W Option to let the router allocate the AFTR Configuration: IPv6 address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. DS-Lite DHCPv6 B4 IPv6 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Once connected, the WAN IPv6 address will be displayed here.
Section 4 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Choose your IPv6 connection type from the drop-down menu. You Connection Is: will be presented with the appropriate options for your connection type. Click "EWBODFE 4FUUJOHT to expand the list and see all of the options. For "VUP %FUFDUJPO refer to page 38. For Static IPv6 refer to page 40. For "VUP $POöHVSBUJPO 4-""$ %)$1W refer to page 42.
Section 4 - Configuration Auto Detection Select "VUP %FUFDUJPO to automatically detect the IPv6 connection method used by your Internet Service Provider (ISP). If Auto Detection fails, you manually select another IPv6 connection type. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected: Primary DNS If you selected Use the following DNS address above, enter the Server: primary DNS server address.
Section 4 - Configuration Auto Detection (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Enable Automatic Enable or disable DHCP-PD for other IPv6 routers connected to the DHCP-PD in LAN: LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.
Section 4 - Configuration Static IPv6 Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP). Use Link-Local Enable or disable link-local address use. Address: Default Gateway: Enter the default gateway for your IPv6 connection. Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address.
Section 4 - Configuration Static IPv6 (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select 4-""$ 3%/44 4-""$ 4UBUFMFTT %)$1 or Stateful DHCPv6. Type: If you selected 4-""$ 3%/44 or 4-""$ 4UBUFMFTT %)$1 as the Autoconfiguration Type: Router Enter the router advertisement lifetime (in minutes).
Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) Select "VUP $POöHVSBUJPO if your ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected: Primary DNS Enter the primary DNS server address.
Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: If DHCP-PD is enabled in LAN IPv6 Address Settings: Enable Automatic Enable or disable DHCP-PD for other IPv6 routers connected to the DHCP-PD in LAN: LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e.
Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) (continued) If DHCP-PD is disabled in LAN IPv6 Address Settings: IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range (End): IPv6 Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done.
Section 4 - Configuration PPPoE Select 111P& if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. MTU PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session. Address Mode Select Static IP if your ISP assigned you an IP address. In most cases, select Dynamic IP. MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.
Section 4 - Configuration PPPoE (continued) MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. If you selected Static IP as the Address Mode and Create a new session as the PPPoE Session: IP Address Enter the IP address provided by your ISP Service Name Enter the ISP service name (optional). Reconnect Mode Select either "MXBZT PO or Manual. MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.
Section 4 - Configuration PPPoE (continued) LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: If Enable DHCP-PD is disabled these additional parameters are available for configuration: LAN IPv6 Address: If DHCP-PD disabled or static address mode is selected, enter the LAN (local) IPv6 address for the router. LAN IPv6 Link- Displays the router’s LAN link-local address.
Section 4 - Configuration PPPoE (continued) If you selected Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range (End): If DHCP-PD is disabled in LAN IPv6 Address Settings: IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.
Section 4 - Configuration IPv6 in IPv4 Tunnel The user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure. Remote IPv4 Enter the IPv4 remote address you will use. Address: Remote IPv6 Enter the IPv6 remote address you will use. Address: Local IPv4 Displays the current local IPv4 address. Address: Local IPv6 Enter the IPv6 local address you will use.
Section 4 - Configuration IPv6 in IPv4 Tunnel (continued) LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode. LAN IPv6 Link- Displays the router’s LAN link-local address.
Section 4 - Configuration IPv6 in IPv4 Tunnel (continued) If you selected 4-""$ 3%/44 or 4-""$ 4UBUFMFTT %)$1 as the Autoconfiguration Type: Router Enter the router advertisement lifetime (in minutes). Advertisement Lifetime: If you selected Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.
Section 4 - Configuration 6to4 In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet. 6to4 Address: Displays the 6 to 4 address. 6to4 Relay: Enter the 6 to 4 relay supplied by your ISP. Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address.
Section 4 - Configuration 6to4 (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select 4-""$ 3%/44 4-""$ 4UBUFMFTT %)$1 or Stateful DHCPv6. Type: If you selected Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.
Section 4 - Configuration 6rd In this section the user can configure the IPv6 6rd connection settings. Assign IPv6 Prefix: Currently unsupported. Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: 6rd Manual Configuration Enable Hub and Enable if you want to minimize the number of routes to the destination Spoke Mode: by using a hub and spoke method of networking.
Section 4 - Configuration 6rd (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select 4-""$ 3%/44 4-""$ 4UBUFMFTT %)$1 or Stateful DHCPv6. Type: If you selected Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.
Section 4 - Configuration Local Connectivity Only -PDBM $POOFDUJWJUZ 0OMZ allows you to set up an IPv6 connection that will not connect to the Internet. Advanced Settings IPv6 ULA Settings Enable ULA: Click here to enable Unique Local IPv6 Unicast Addresses settings. IPv6 ULA Settings: Enable this option to use the default ULA prefix. If you selected &OBCMF 6-" and disabled %FGBVMU 6-" 1SFöY: ULA Prefix: Enter your own ULA prefix. Current IPv6 ULA Settings Current ULA Displays the current ULA prefix.
Section 4 - Configuration VLAN The guest zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. Note: If Smart Connect is enabled, Guest Zone is unavailable. In the Settings menu on the bar on the top of the page, click Internet, then click the 7-"/ link.
Section 4 - Configuration Priority ID: Select a priority ID from the drop-down menu to assign to the corresponding VLAN. Interface Traffic Type Setting LAN 1-4, Wireless, Select which VLAN to assign each of the interface ports to. The options Guest Zone: are Internet, IPTV, or VOIP. Click Save when you are done.
Section 4 - Configuration Wireless From this page you can configure your wireless network settings. Smart Connect Smart Connect: Enable or disable the Smart Connect Feature. When enabled only a few configuration options are available to simplify configuration. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the network.
Section 4 - Configuration Wireless - Smart Connect Disabled If Smart Connect is Disabled the following options are available: 2.4GHz / 5GHz Status: Enable or disable the 2.4 GHz / 5 GHz wireless network. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Advanced Settings Security Mode: Choose None or 81" 81" 1FSTPOBM recommended). 802.11 Mode Select the desired wireless networking standards to use. (2.
Section 4 - Configuration HT20/40 Enable or disable HT20/40 Coexistence. Coexistence: (2.4 GHz): Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to "MXBZT &OBCMF, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information.
Section 4 - Configuration Guest Zone The guest zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. Note: If Smart Connect is enabled, Guest Zone is unavailable. In the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. 2.4 GHz / 5 GHz Status: Enable or disable the 2.
Section 4 - Configuration Network This section will allow you to change the local network settings of the router and to configure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click "EWBODFE 4FUUJOHT to expand the list and see all of the options. Network Settings LAN IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1.
Section 4 - Configuration Network (continued) DHCP Server Status: Enable or disable the DHCP server. DHCP IP Address Enter the starting and ending IP addresses for the DHCP server’s IP Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time: Enter the length of time for the IP address lease in minutes.
Section 4 - Configuration Features QoS Engine This section will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-urgent file, you might wish to assign the former device a higher priority than the latter so that the movie streaming is not disrupted by the traffic of the other devices on the network. In the Features menu on the bar on the top of the page, click 2P4 &OHJOF.
Section 4 - Configuration Firewall Settings The router’s firewall protects your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click 'JSFXBMM Settings. Click "EWBODFE 4FUUJOHT to expand the list and see all of the options. Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations.
Section 4 - Configuration Firewall Settings (continued) Advanced Settings - Application Level Gateway (ALG) Configuration PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients.
Section 4 - Configuration IPv4/IPv6 Rules The IPv4/IPv6 Rules section is an advanced option that lets you configure what kind of traffic is allowed to pass through the network. To configure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To configure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click "EWBODFE. To begin, use the drop-down menu to select whether you want to "--08 or %&/: the rules you create.
Section 4 - Configuration Port Forwarding Port forwarding allows you to specify a port or range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click 1PSU 'PSXBSEJOH. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column.
Section 4 - Configuration Virtual Server The virtual server allows you to specify a single public port on your router for redirection to an internal LAN IP address and Private LAN port. To configure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click 1PSU 'PSXBSEJOH. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column.
Section 4 - Configuration Website Filter The website filter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked). In the Features menu on the bar on the top of the page, click 8FCTJUF 'JMUFS. If you want to create a list of sites to block, select %&/: DMJFOU BDDFTT UP 0/-: these sites from the drop-down menu. All other sites will be accessible.
Section 4 - Configuration Static Routes The Static Routes section allows you to define custom routes to control how data traffic is moved around your network. In the Features menu on the bar on the top of the page, click Static Routes. To configure IPv6 rules, click IPv6 and refer to IPv6 on page 73. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column.
Section 4 - Configuration IPv6 To configure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the "EE 3VMFT button. Click Save when you are done. If you edit or create a rule, the following options will appear: Name: Enter a name for the rule.
Section 4 - Configuration Dynamic DNS Most Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is. In the Features menu on the bar on the top of the page, click Dynamic DNS. Enable Dynamic Enable or disable dynamic DNS. Enabling this feature will reveal DNS: further configuration options.
Section 4 - Configuration IPv6 Host The IPv6 host settings are found at the bottom of the Dynamic DNS page. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the "EE 3FDPSE button. Click Save when you are done. If you edit or create a rule, the following options will appear: Host Name: Enter the host name that you registered with your dynamic DNS service provider.
Section 4 - Configuration Quick VPN This page will help you configure the Quick VPN feature of your router. For more information refer to Quick VPN on page 80. Before proceeding, ensure that your Internet connection is working properly. We recommend configuring Dynamic DNS before proceeding with Quick VPN setup.
Section 4 - Configuration Quick VPN (continued) Advanced Settings - Address Autoconfiguration Settings Authentication Choose the authentication protocol type: .4$)"1W , 1"1, or $)"1. Protocol: .4$)"1W is the default. MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128. RC4-128 is the default. Click Save when you are done.
Section 4 - Configuration User The User section is used to create, manage, and delete user accounts with user-defined access to certain router services. In the Features menu on the bar on the top of the page, click Quick VPN. To configure user accounts, on the Quick VPN page click User. If you wish to remove a user account, click on its trash can icon in the Delete column. If you wish to edit a user account, click on its pencil icon in the Edit column.
Section 4 - Configuration User (continued) FTP Status Enable or disable ftp server access for this user. Permission If '51 is enabled, choose to assign either Read Only or 3FBE 8SJUF permission. Folder VPN Status Enable or disable Virtual Private Network (VPN) functionality for this user. Click Save when you are done.
Section 4 - Configuration Management Time & Schedule Time The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time. In the Management menu on the bar on the top of the page, click Time & Schedule. Time Configuration Time Zone: Select your time zone from the drop-down menu. Time: Displays the current date and time of the router.
Section 4 - Configuration Schedule Some router functions can be controlled through a pre-configured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the "EE 3VMF button. Click Save when you are done.
Section 4 - Configuration System Log The router keeps a running log of events. This log can be sent to a Syslog server, or sent to your email address. In the Management menu on the bar on the top of the page, click 4ZTUFN -PH. Log Settings System Log Click the Check System Log button to download a text file containing the system log. SysLog Settings Enable Logging to Check this box to send the router logs to a SysLog Server.
Section 4 - Configuration System Log (continued) SMTP Server Port: Enter your SMTP server port. Enable Check this box if your SMTP server requires authentication. Authentication: Account Name Enter your SMTP account name. Password Enter your SMTP account's password E-mail Log When Full or On Schedule Send When Log If enabled, this option will set the router to send the log when it is full. Full Send on Schedule If enabled, this option will set the router to send according to a set schedule.
Section 4 - Configuration System Admin This page will allow you to change the administrator (Admin) password and enable remote management. In the Management menu on the bar on the top of the page, click "ENJO. To load, save, reset settings, or reboot the router, click System and refer to Schedule on page 81. Admin Password Password: Enter a new password for the administrator account. You will need to enter this password whenever you configure the router using a web browser.
Section 4 - Configuration System This page allows you to save the router’s current configuration, load a previously saved configuration, reset the router to its factory default settings, or reboot the router. From the Admin page, click System. To return to the Admin page, click "ENJO. System Save Settings To This option will save the current router configuration settings to a file Local Hard Drive: on your computer. Load Settings This option will load a previously saved router configuration file.
Section 4 - Configuration Upgrade This page will allow you to upgrade the router’s firmware or language pack, either automatically or manually. To manually upgrade the firmware or language pack, you must first download the relevant file from IUUQ TVQQPSU dlink.com. In the Management menu on the bar on the top of the page, click Upgrade. Firmware Firmware The current firmware’s version and date will be displayed.
Section 4 - Configuration Statistics On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. In the Management menu on the bar on the top of the page, click Statistics. You can view the Internet, -"/, 8J 'J ()[, or 8J 'J ()[ by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted.
Section 5 - Quick VPN Quick VPN This router is equipped with D-Link's Quick VPN technology. Virtual Private Networking (VPN) creates a connection between devices across the Internet. Using Quick VPN allows you to securely connect your computer or mobile device to places with free, untrusted Wi-Fi hotspots in places like coffee shops and hotels by encrypting and relaying it through your home Internet connection.
Section 5 - Quick VPN Important Information The following instructions explain and help you to configure your D-Link Quick VPN enabled router and devices to create a Virtual Private Network (VPN). This feature is provided for advanced users who wish to connect remotely and use their router's Internet connection to add a layer of security while using untrusted networks. Configure the Quick VPN Server on your router first and then set up client devices to connect through your router's WAN connection.
Section 5 - Quick VPN Quick VPN Server Setup Instructions Configure the following options: L2TP over IPSec: Enable or disable the Quick VPN server. If you enable Quick VPN, the following options are available: Username: . Enter a username between 1 and 20 characters Password: Enter a password between 1 and 20 characters. PSK: Enter a passkey between 6 and 64 characters. Authentication Choose the authentication protocol type: .4$)"1W , 1"1, or $)"1. Protocol: .4$)"1W is the default.
Section 5 - Quick VPN iOS Devices VPN Setup Instructions This section provides Quick VPN setup instructions for iOS devices using the &YQPSU Profile function. Refer to Quick VPN Server Setup Instructions on page 90 for more information. Open the e-mail containing your Quick VPN profile. Open the attachment.
Section 5 - Quick VPN VPN Setup Instructions (Continued) The Install Profile dialog will appear, tap Install in the upper right hand corner of your screen. Enter your device's passcode when prompted.
Section 5 - Quick VPN VPN Setup Instructions (Continued) Acknowledge the disclaimer by tapping Install in the upper right hand corner. Tap the red Install button. Enter the Shared Secret (PSK) from the Quick VPN configuration page. Tap Done. Your iOS device is now configured to connect to your Quick VPN server.
Section 5 - Quick VPN Connect or Disconnect To connect or disconnect from to your Quick VPN server, open Settings and tap the button next to VPN. The VPN icon will appear in the notification area at the top of your screen indicating that your device is currently connected to the Quick VPN server.
Section 5 - Quick VPN Mac OS X VPN Setup Instructions This section provides Quick VPN setup instructions for OS X using the &YQPSU Profile function. Refer to Quick VPN Server Setup Instructions on page 90 for more information. Open the exported profile. The Install Profile dialog will appear; click Continue and Install. Enter your user account password when prompted. Close the Profiles dialog. Ò Go to > System Preferences...
Section 5 - Quick VPN VPN Setup Instructions (Continued) Enter your Passkey in the Shared Secret text box and click 0, "QQMZ then OK. Your Mac is now configured to connect to your Quick VPN server.
Section 5 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, go to Preferences... > Network. Ò> System Select the Quick VPN connection and click on the Connect or Disconnect button.
Section 5 - Quick VPN Windows 7 VPN Setup Instructions Click the Start button and type vpn into the Search programs and files box. Select 4FU VQ B WJSUVBM QSJWBUF OFUXPSL 71/ DPOOFDUJPO Enter the *1 %%/4 BEESFTT of your Quick VPN server in the Internet address box, create a name for your connection in the Destination Name, check Don't Connect now; just set it up so I can connect later, and click /FYU.
Section 5 - Quick VPN VPN Setup Instructions (Continued) Enter your Username. If you would like windows to save your password, enter your Password and check Remember this password. Click Create to continue. Do not click Connect Now. Click Close. Click the Start button and type view network connections into the Search programs and files text box. Select View network connections.
Section 5 - Quick VPN VPN Setup Instructions (Continued) Click "EWBODFE TFUUJOHT Enter your Passkey in the Key text box under Use preshared key for authentication. Click OK to close "EWBODFE 1SPQFSUJFT and click OK to close Quick VPN Connection Properties. Your Windows 7 system is now configured to connect to your Quick VPN server.
Section 5 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar and from the Dial Up and VPN section click on your Quick VPN connection and click on the Connect or Disconnect button.
Section 5 - Quick VPN Windows 8.1/8 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 8.1/8 Click the Start button and type vpn. Select Manage virtual private networks. From the Network Settings page, click "EE B 71/ $POOFDUJPO.
Section 5 - Quick VPN Add a VPN Connection 1 Select Microsoft from VPN Provider. 2 Create a name for your VPN connection. 3 Enter your *1 %%/4 BEESFTT of your Quick VPN server. 4 Select User name and password from Type of sign-in info. 5 If you would like windows to remember your sign-in information, enter your 6TFS OBNF 1BTTXPSE and select Remember my sign-in info 6 Choose Save.
Section 5 - Quick VPN VPN Setup Instructions (Continued) Right-click on the Quick VPN Connection you just created and left-click on Properties. Select the Security tab.
Section 5 - Quick VPN VPN Setup Instructions (Continued) Click the Start button and type view network connections. Select View network connections. Right-click your Quick VPN Connection and left-click Properties. Select the Security tab.
Section 5 - Quick VPN VPN Setup Instructions (Continued) Click "EWBODFE TFUUJOHT Enter your Passkey in the Key text box under Use preshared key for authentication. Click OK to close "EWBODFE 1SPQFSUJFT and click OK to close Quick VPN Properties. Your Windows 8.1/8 system is now configured to connect to your Quick VPN server.
Section 5 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar. Click on your Quick VPN connection and click on the Connect or Disconnect button.
Section 5 - Quick VPN Windows 10 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 10. Click Start > Settings > Network & Internet > /FUXPSL̓BOE̓4IBSJOH̓$FOUFS 71/ "EE B 71/ $POOFDUJPO.
Section 5 - Quick VPN Add a VPN Connection 1 Select 8JOEPXT CVJMU JO from the VPN Provider drop down menu. 2 Create a name for your VPN connection. 3 Enter your *1 %%/4 BEESFTT of your Quick VPN server. 4 Select - 51 *14FD with pre-shared key from VPN type. 5 Enter the Passkey. 6 Select User name and password from Type of sign-in info. If you would like windows to remember your sign-in information, enter your 6TFS OBNF 1BTTXPSE and select Remember my sign-in info 7 Choose Save.
Section 5 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar and click on your Quick VPN connection. The Network & Internet Settings page will open. Click on the Connect or Disconnect button.
Section 5 - Quick VPN Android VPN Setup Instructions This section provides Quick VPN setup instructions for Android devices. Your device's screens may vary.
Section 5 - Quick VPN Edit VPN Profile 1 Enter a name for your VPN connection. 2 Select - 51 *14FD PSK for Type. 3 Enter the *1 %%/4 BEESFTT of your Quick VPN server. 4 Enter your Passkey in IPSec pre-shared key field. 5 Choose Save. Your Android device is now configured to connect to your Quick VPN server.
Section 5 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, go to Settings > More from the Wireless & networks > VPN and select the Quick VPN connection you created.
Section 5 - Quick VPN Connect or Disconnect (Continued) To connect, enter your Username and Password and select $0//&$5. To disconnect, select %*4$0//&$5.
Section 6- Connecting a Wireless Client Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-882 router.
Section 6- Connecting a Wireless Client Windows® 10 When connecting to the DIR-882 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here. Otherwise refer to the product label for the default Wi-Fi network SSID and password, or enter the Wi-Fi credentials set during the product configuration.
Section 6- Connecting a Wireless Client To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the $POOFDU "VUPNBUJDBMMZ check box. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click /FYU to connect to the network. Your computer will now automatically connect to this wireless network when it is detected.
Section 6- Connecting a Wireless Client Windows® 8 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar next to the time display.
Section 6- Connecting a Wireless Client You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click /FYU. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function.
Section 6- Connecting a Wireless Client Windows® 7 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area.
Section 6- Connecting a Wireless Client 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router.
Section 6- Connecting a Wireless Client 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.
Section 6- Connecting a Wireless Client WPS The WPS feature of the DIR-882 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side.
Section 6- Connecting a Wireless Client 3. Double-click the DIR-882. DIR-882 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click /FYU.
Section 6- Connecting a Wireless Client 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click /FYU to continue.
Section 6- Connecting a Wireless Client 7. The following window appears while the DIR-882 is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the DIR-882 has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup.
Section 6- Connecting a Wireless Client Windows Vista® Windows Vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the VTFS NBOVBM PG ZPVS XJSFMFTT BEBQUFS GPS IFMQ DPOOFDUJOH UP B XJSFMFTT OFUXPSL .PTU XJSFMFTT VUJMJUJFT XJMM IBWF B iTJUF TVSWFZw option similar to the Windows Vista® utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility.
Section 6- Connecting a Wireless Client WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2.
Section 6- Connecting a Wireless Client 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.
Section 7 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-882. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to these examples. 1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.
Section 7 - Troubleshooting t $POöHVSF ZPVS *OUFSOFU TFUUJOHT t (P UP Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. t $MJDL UIF Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. t (P UP UIF "EWBODFE tab and click the button to restore these settings to their defaults. Click OK three times.
Section 7 - Troubleshooting 3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL.
Section 7 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size.
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. 8IZ % -JOL 8JSFMFTT? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford.
Appendix A - Wireless Basics 8JSFMFTT 1FSTPOBM "SFB /FUXPSL 81"/ Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.
Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people.
Appendix A - Wireless Basics Wireless Modes There are basically two modes of networking: t Infrastructure – All wireless clients will connect to an access point or wireless router. t "E IPD – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-882 wireless network USB adapters. An Infrastructure network contains an access point or wireless router.
Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.) At the prompt, type ipconfig and press &OUFS.
Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 7 Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows® XP Click on Start > Control Panel > Network Connections.
Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-882 offers the following types of security: t 81" 8J 'J 1SPUFDUFE "DDFTT t 81" 8J 'J 1SPUFDUFE "DDFTT t 81" 14, 1SF 4IBSFE ,FZ t 81" 14, 1SF 4IBSFE ,FZ What is WPA? WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
Appendix C - Technical Specifications Technical Specifications Device Interfaces t Wireless Interface (2.4 GHz): IEEE 802.11n/g/b t Wireless Interface (5 GHz): IEEE 802.11 ac/n/a t Four 10/100/1000 Mbps LAN ports t One 10/100/1000 Mbps WAN port Antenna Types t Four external antennas Standards t IEEE 802.11ac1,2,3 t IEEE 802.11n t IEEE 802.11g t IEEE 802.11b t IEEE 802.11a t IEEE 802.3 t IEEE 802.3u t IEEE 802.
Appendix D - Regulatory Information Regulatory Statements 'FEFSBM $PNNVOJDBUJPO $PNNJTTJPO *OUFSGFSFODF 4UBUFNFOU This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix D - Regulatory Information *.1035"/5 /05*$& '$$ 3BEJBUJPO &YQPTVSF 4UBUFNFOU This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 38 cm between the radiator and your body. *OOPWBUJPO 4DJFODF BOE &DPOPNJD %FWFMPQNFOU $BOBEB *4&% 4UBUFNFOU This Class B digital apparatus complies with Canadian ICES-003.
Appendix D - Regulatory Information Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
Appendix D - Regulatory Information 1&& 警語： 以下警語適用台灣地區 依據 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至 無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 電磁波曝露量MPE標準值(MPE) 1 mW/cm2，本產品使用時建議應距離人體 0 cm 5G 2.4 G )UHTXHQF\ %DQG V )UHTXHQ]EDQG )UpTXHQFH EDQGH V %DQGDV GH )UHFXHQFLD )UHTXHQ]D H )UHTXHQWLH V 0D[ 2XWSXW 3RZHU (,53 0D[ 2XWSXW 3RZHU &RQVRPPDWLRQ G¶pQHUJLH PD[ 3RWHQFLD Pi[LPD GH 6DOLG
Appendix D - Regulatory Information &VSPQFBO $PNNVOJUZ %FDMBSBUJPO PG $POGPSNJUZ Česky [Czech] Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí 2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o firmwaru produktu lze stáhnout na stránkách k produktu www.dlink.com. Dansk [Danish] D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv 2014/53/EU.
Appendix D - Regulatory Information Latviski [Latvian] Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai 2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā produkta lapā vietnē www.dlink.com.
Appendix D - Regulatory Information Íslenska [Icelandic] Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www. dlink.com. Norsk [Norwegian] Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet 2014/53/EU.
Appendix D - Regulatory Information /05*$& 0' 8*3&-&44 3"%*0 -"/ 64"(& */ 5)& &6301&"/ $0..6/*5: ŷ'03 8*3&-&44 130%6$5 0/-:Ÿ t t This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries.
Appendix D - Regulatory Information "7*4 $0/$&3/"/5 -h65*-*4"5*0/ %& -" 3"%*0 4"/4 '*- -"/ %"/4 -" $0..6/"65² &6301²&//& 6/*26&.&/5 1063 -&4 130%6*54 4"/4 '*t t Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz afin de réduire les risques d'interférences.
Appendix D - Regulatory Information "77*40 1&3 - 640 %* -"/ 3"%*0 8*3&-&44 /&--" $0.6/*5® &6301&" 40-0 1&3 130%055* 8*3&-&44 t t Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.
Appendix D - Regulatory Information 4"'&5: */4536$5*0/4 The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. t Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product.
Appendix D - Regulatory Information $0/4*(/&4 %& 4²$63*5² Les consignes générales de sécurité ci-après sont fournies afin d’assurer votre sécurité personnelle et de protéger le produit d’éventuels dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails. t L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet en métal relié à la terre par exemple) avant de toucher le produit.
Appendix D - Regulatory Information *4536;*0/* 1&3 -" 4*$63&;;" Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto. t L’elettricità statica può essere pericolosa per i componenti elettronici.
Appendix D - Regulatory Information %JTQPTJOH BOE 3FDZDMJOH :PVS 1SPEVDU &/(-*4) &/ This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free.
Appendix D - Regulatory Information '3"/±"*4 '3 Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement.
Appendix D - Regulatory Information *5"-*"/0 *5 La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare.
Appendix D - Regulatory Information 10-4,* 1Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi SFDZLMJOHV 1P [BLPǩD[FOJV VȈZULPXBOJB QSPEVLUV OJFLUØSF PEQPXJFEOJF EP UFHP DFMV QPENJPUZ QS[ZKNnj UBLJF QSPEVLUZ nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze.
Appendix D - Regulatory Information ."(:"3 )6 Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők.
Appendix D - Regulatory Information %"/4, %, Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis.
Appendix D - Regulatory Information 47&/4," 4& Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.
