User's Manual

69D-Link DIR-X6060 User Manual
Section 4 - Conguration
System Admin
This page will allow you to change the administrator (Admin) password and
enable remote management. In the Management menu on the bar on the top
of the page, click System Admin. To load, save, reset settings, or reboot the
router, click System and refer to Schedule on page 66.
Admin Password
Password: Enter a new password for the administrator account. You will need to
enter this password whenever you congure the router using a web
browser.
Advanced Settings - Administration
Enable Remote
Management:
Remote management allows the DIR-X6060 to be congured from the
Internet by a web browser. A password is still required to access the web
management interface.
Remote Admin
Port:
The port number used to access the DIR-X6060 is used in the URL.
Example: https://x.x.x.x:8081 where x.x.x.x is the Internet IP address
of the DIR-X6060 and 8081 is the port used for the web management
interface.
LED Control: Turn on or o to congure the LED status lights.
Click Save when you are done.