Owners manual
21D-Link DCS-2630L User Manual
Section 4: Conguration
Step 1
The Motion Detection Setup Wizard will guide you through a step-by-step
process to congure your camera's motion detection functions.
Click Next to continue.
Motion Detection Setup Wizard
Step 2
This step will allow you to enable or disable motion detection. You may draw
areas for your camera to monitor for motion.
1. Check the Enable Video Motion box.
2. Check the Enable PIR box and select the PIR sensitivity from the drop-
down menu if you want to turn on PIR.
3. Select Draw motion area and use your mouse to click and drag on the
area that you would like to monitor for motion.
4. Enter the sensitivity. Higher the number the more sensitive the
detection of movement will be.
5. You can select Erase motion area and erase areas if needed. Click
Clear if you want to erase the area.
6. Click Next to continue.
Refer to "Motion Detection" on page 39 for details about how to specify
the detection sensitivity and adjust the camera’s ability to detect movement.
Click Next to continue.