User's Manual

12
Installation
This section will walk you through installing the router. Placement of the router is very important. Be sure not to place it in an enclosed space like a cabinet, closet, attic,
garage or any other area where there is not ample ventilation.
Before you Begin
• You can only use the Ethernet port on your modem. If you were using a USB connection before using the router then you must turn off your modem, disconnect the
USB cable and connect an Ethernet cable to the WAN port on the router and then turn the modem back on. In some cases, you may need to contact your ISP to
change connection types (USB to Ethernet)
•
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your
computer or you will not be able to connect to the Internet.