DSH-G200 D-Link Corporation DSH-G200 Omna Z-Wave Bridge User’s Manual Version 1.0 May.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
channels only. Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé.
DSH-G200 D-Link Corporation Table of Contents 1. 2. 3. 4. PRODUCT DESCRIPTION .................................................................................. 3 APPEARANCE ..................................................................................................... 3 APPLICATIONS ................................................................................................... 4 INSTALLATIONS & BASIC CONFIGURATIONS ...........................................
DSH-G200 D-Link Corporation 1. PRODUCT DESCRIPTION The DSH-G200 is a Z-Wave smart home bridge supporting S2 security and working with Apple HomeKit app to manage Z-Wave nodes to communicate with other HomeKit related devices. 2. APPEARANCE Top LED: Status indicator Wireless button: Z-Wave pairing/un-pairing Rear LAN port x1 Micro USB: Power jack, 5V/1.A or 1.
DSH-G200 D-Link Corporation 3. APPLICATIONS 4. INSTALLATIONS & BASIC CONFIGURATIONS Step 1 Make sure your DSH-G200 is powered on and near by your iOS devices. Step 2 Open Home and tap “Add Accessory” or tap your home.
DSH-G200 D-Link Corporation Step 3 Wait for the DSH-G200 to appear, then tap it. (Note: If asked to Add Accessory to Network, tap “Allow”.) Step 4 Scan the eight-digit HomeKit code on the DSH-G200 or its documentation. Or enter the code manually. Step 5 Add information about your DSH-G200, like its name or the room it's located in. Siri will identify the DSH-G200 by the name you give it and the location it's in. Step 6 Tap “Next”, then tap “Done” to finish the setup. Note: 1.
