Version DRAFT | 01/09/2014 User Manual mydlink™ Wi-Fi Smart Plug DSP-W215
Table of Contents Table of Contents Product Overview............................................................................... 3 Package Contents............................................................................................ 3 Minimum Requirements................................................................................ 3 Introduction....................................................................................................... 4 Hardware Overview............................
Section 1 - Product Overview Product Overview Package Contents DSP-W215 mydlink Wi-Fi Smart Plug Quick Install Guide If any of the above items are missing, please contact your reseller. Minimum Requirements Requirements • IEEE 802.11n or 802.11g wireless router with Internet service • An available power outlet • Mobile device or tablet with iOS 6.0 - 7.0 or Android 4.0 - 4.3.
Section 1 - Product Overview Introduction The DSP-W215 mydlink Wi-Fi Smart Plug is a multi-purpose, compact, and easy-to-use device that allows you to monitor and control your home’s electronic devices from wherever you are. Scheduling provides a helpful way to save power while you’re at work or asleep, and the mydlink app provides an easy way to check usage, set up alerts, or turn a device on or off.
Section 1 - Product Overview Hardware Overview LEDs and Buttons 3 1 4 2 1 WPS/Reset Button 2 ON/OFF Button WPS Press for one second to start the WPS connection process. The Status LED will start to blink. Reset Press and hold for 10 seconds to reset the device back to the factory default settings. Press to turn the device ON or OFF. Solid Green 3 Status LED During the WPS process. Blinking Orange The device is attempting to communicate with your wireless network.
Section 1 - Product Overview Installation Considerations Plan the location of your Smart Plug devices: 1. Connect Smart Plug devices into electrical outlets that are not controlled by a wall switch. This will help you to avoid accidentally turning off power to the device. 2. Verify that your Smart Plug devices are electrically rated to operate with the power available in your location. 3.
Section 1 - Product Overview Wireless Installation Considerations The Smart Plug lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. Keep in mind the number and thickness of walls and ceilings, as well as the location of other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Section 2 - Installation and Setup Installation and Setup To install your Smart Plug, download and install the mydlink Wi-Fi Smart Plug app. This app will walk you through installing and configuring your Smart Plug. Step 1 Download the app from the App Store (iOS) or Google Play (Android). Step 2 Once installed, launch the app. Step 3 Plug in your Smart Plug in an available outlet. If the Power LED does not come on, press the On/Off Button. The Power LED will turn on. Press Next to continue.
Section 2 - Installation and Setup Step 4 When the Status LED is blinking orange, press Next. Step 5 If your router supports WPS, press the WPS button on your router. Press Next to continue. Please refer to your router’s documentation if you are unsure if your router supports WPS. If your router does not support WPS or you want to manually connect to your wireless router, press Manual Setup and skip to Step 6 - Manual on page 11.
Section 2 - Installation and Setup Step 6 - WPS Press the WPS button on your Smart Plug. The Status LED will start to blink green. Allow up to two minutes to connect to your router. Press Next to continue. Note: You must press the WPS button on your router and the Smart Plug within two minutes. Step 7 - WPS After about two minutes, the Status LED will turn solid green. This indicates that the Smart Plug has successfully connected to your wireless router. Press Next to continue. Skip to Step 10 on page 13.
Section 2 - Installation and Setup Step 6 - Manual You must connect to the Smart Plug directly. Do not close this app. On your device, go to Settings > Wi-Fi. Select the network called DSPxxxx or DSP-xxxx_AC. Note: xxxx represents numbers and/or letters that are unique to your Smart Plug device. For the exact network name (SSID), refer to the Quick Install card that came with the product. Press Next to continue. Step 7 - Manual Enter the PIN code and press Connect.
Section 2 - Installation and Setup Step 8 - Manual A list of available wireless networks will appear. Press your wireless network (the SSID of your wireless router). Step 9 - Manual If you have secured your wireless network, enter your Wi-Fi password and click Join. Continue with step 10 on the next page.
Section 2 - Installation and Setup Step 10 Once you connect, you will need to connect to your mobile device or tablet (that you are currently running the app from) to your wireless router (if you are not already). Make sure you keep this app running. On your device, go to Settings > Wi-Fi. Connect to your wireless router and enter your Wi-Fi password (if you have one). Go back to this app and press Next to continue. Step 11 Your device will now scan your network for Smart Plugs.
Section 2 - Installation and Setup Step 12 If you have received this error message, please do the following: a. Please make sure your mobile device is connected to your router. b. Make sure the Power LED and Status LEDs on your Smart Plug are both solid green. c. Press Hardware Settings and verify the settings. d. Press Discovery Again to rescan. Step 13 Enter a nickname for your Smart Plug. Click Change your Icons to change the icon for your device or click Done in the upper right corner to finish.
Section 2 - Installation and Setup Step 14 Select an icon that represents the device plugged into your Smart Plug and then press Use in the upper right corner. If you do not want to change the icon, press Cancel. Step 15 Your settings will now save.
Section 3 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of your Smart Plug. Read the following descriptions if you are having problems. 1. Why isn’t the Power LED turning on when I plug in my Smart Plug? If the Power LED is not turning on, make sure: a. Press the On/Off button on the front of the Smart Plug. b. Make sure the outlet is working properly. Plug in another device to see if it works. c.
Appendix A - Technical Specifications Technical Specifications Standards • IEEE 802.11n • IEEE 802.11g LEDs Support Functions • Smart remote control • Push notifications • Energy usage statistics • Power scheduling • Overheat protection Certifications • FCC • UL Security • WPA • WPA2 • WPS (Wi-Fi Protected Setup) Weight • 125 grams (4.41 ounces) • Power • Status Dimensions • 90 x 61 x 35.5 mm (3.54 x 2.40 x 1.
Appendix B - Contacting Technical Support Contacting Technical Support U.S. and Canadian customers can contact D-Link technical support through our web site or by phone. Before you contact technical support, please have the following ready: • Model number of the product (e.g. DSP-W215) • Hardware Revision (located on the label on the bottom of the product (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the product).
Appendix C - Warranty Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and • Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Appendix C - Warranty Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions.
Appendix C - Warranty • USA residents send to 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect.
Appendix C - Warranty IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
Appendix C - Warranty CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix C - Warranty Country Code selection feature to be disabled for products marketed to the US/CANADA Industry Canada statement: IC statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Appendix D - Registration Registration Register your product online at registration.dlink.com Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
