Version 2.
Information in this document is subject to change without notice. © 2007 D-Link Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Table of Contents D-Link Web Smart Switch User Manual Table of Contents Table of Contents ............................................................................................................................................. i About This Guide............................................................................................................................................. 1 Online Resources....................................................................................................
Table of Contents D-Link Web Smart Switch User Manual Tool Menu .................................................................................................................................................... 22 Reset ........................................................................................................................................................ 22 Configure Backup & Restore..........................................................................................................
About This Guide D-Link Web Smart Switch User Manual About This Guide This guide provides instructions to instal D-Link Fast Ethernet Web Smart Switch DES-1228/28P/52, how to use the SmartConsole Utility, and to configure Web-based Management Utility step-by-step. Note: The model you have purchased may appear slightly different from the illustrations shown in the document.
1 Hardware Installation 1 D-Link Web Smart Switch User Manual Hardware Installation This chapter provides unpacking and installation information for the D-Link Web-Smart Switch. Step1: Unpacking Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the User Manual to make sure all items are present and undamaged. If any item is missing or damaged, please contact your local D-Link reseller for replacement.
1 Hardware Installation D-Link Web Smart Switch User Manual Then, use the screws provided with the equipment rack to mount the switch in the rack. Figure 3 – Mount the Switch in the rack or chassis Step 3 – Plugging in the AC Power Cord Users may now connect the AC power cord into the rear of the switch and to an electrical outlet (preferably one that is grounded and surge protected).
2 Getting Started 2 D-Link Web Smart Switch User Manual Getting Started This chapter guides you how to get into and introduces the management interface of D-Link Web-Smart Switch. Management Options The D-Link Web Smart Switch can be managed through any port on the device by using the Web-based Management Utility or through any PC using the SmartConsole Utility. If you want to manage only one D-Link Web Smart Switch, the Web-Based Management Utility is the better option.
2 Getting Started D-Link Web Smart Switch User Manual Login Web-based Management Utility In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the same subnet as the switch. For example, if the switch has an IP address of 192.168.0.1, the PC should have an IP address of 192.168.0.x (where x is a number between 2 and 254), and a subnet mask of 255.255.255.0.
2 Getting Started D-Link Web Smart Switch User Manual Option 1: Follow these steps to install the SmartConsole Utility via the autorun program on the installation CD. 1. Insert the Utility CD into your CD-Rom Drive. 2. The autorun program will pop up automatically 3. Simply click on the ”Install SmartConsole Utility” button and an installation wizard will guide you through the process. 4.
3 Product Introduction 3 D-Link Web Smart Switch User Manual Product Introduction Thank you and congratulations on your purchase of D-Link Web Smart Switch Products. D-Link's next generation Web Smart Ethernet switch series blends plug-and-play simplicity with exceptional value and reliability for small and medium-sized business (SMB) networking.
3 Product Introduction D-Link Web Smart Switch User Manual Front Panel Figure 8 – DES-1228 Front Panel Power LED: The Power LED lights up when the Switch is connected to a power source. CPU LED: When the CPU LED is blinking, then the switch is in the normal condition. If the CPU LED is off or stays in solid light state that means the system might have crashed or firmware upgrade has failed. Port Link/Act LED (1-28): The Link/Act LED flashes which indicates a network link through the corresponding port.
3 Product Introduction D-Link Web Smart Switch User Manual PoE LED (1-24): The PoE LED shows the PoE status of the corresponding port. Green light indicates the corresponding port is providing standard 48V power to the PD. Light off indicates this port is not providing the power or no PD found. Red light indicates a PoE error has occurred at this port. You may check the detailed information for the errors on the PoE Port Setting page in Web-based Management Utility.
3 Product Introduction D-Link Web Smart Switch User Manual Rear Panel Figure 13 – DES-1252 Rear Panel Power: The power port is where to connect the AC power cord.
4 SmartConsole Utility 4 D-Link Web Smart Switch User Manual SmartConsole Utility D-Link SmartConsole Utility allows the administrator to quickly discover all D-Link smart switches which are in the same domain the PC, collect traps and log messages, and quick access to some basic configurations of the switch. The SmartConsole Utility is divided into three parts, Device Configurations at the top, Device List, and SmartConsole Settings at the left.
4 SmartConsole Utility D-Link Web Smart Switch User Manual Log By clicking on this icon the Log window will pop up. Click View Log to show the events of the SmartConsole Utility and the device. Date/Time indicates when the log was received, IP indicates where it comes from and Status shows the content of this log message. Click Clear Log to clear all log entries. Click OK to exit. Figure 16 – SmartConsole Log Trap By clicking on this icon the Trap window will pop up.
4 SmartConsole Utility D-Link Web Smart Switch User Manual Figure 18 – SmartConsole File Monitor Save: To record the setting of the Device List as default for the next time the SmartConsole Utility is used. Monitor Save As: To record the setting of the Device List in an appointed filename and file path. Monitor Load: To manually load a Device List setting file. Help By clicking on this icon a window with information about the SmartConsole will pop up.
4 SmartConsole Utility D-Link Web Smart Switch User Manual Device Configurations The Device Configurations in the SmartConsole Utility has five icons: Device Settings Device Password Manager Firmware Upgrade DHCP Refresh Web Access and the , , device buttons for the Device List. Device Settings Select a switch from the Device List, then clicking on this icon the Device Settings window will pop up.
4 SmartConsole Utility D-Link Web Smart Switch User Manual Device Password Manager Select a switch from the Device List, then clicking on this icon the Device Password Manager window will pop up. Here you can enter a new password and confirm. Figure 21 – SmartConsole Device Password Manager Firmware Upgrade Select a switch from the Device List, then clicking on this icon the Firmware Upgrade window will pop up.
4 SmartConsole Utility D-Link Web Smart Switch User Manual Web Access Select a switch from the Device List, then clicking this icon an internet browser will pop up (default is Internet Explorer). Here you can configure the Switch through the Web-based Management Utility. You may also get into the Web-based Management Utility by double clicking the device in the device list.
4 SmartConsole Utility D-Link Web Smart Switch User Manual . Please SmartConsole Utility. When the device was detected not reachable, the icon will change to check if the power or the cable of this device is disconnected. IP Address: Shows the current IP addresses of devices. MAC Address: Shows the device MAC Address. Protocol version: Shows the version of the Utility protocol. Product Name: Shows the device product name. System Name: Shows the appointed device system name.
5 Configuration 5 D-Link Web Smart Switch User Manual Configuration Through a Web-based Management Utility, the features and functions of the D-Link Web Smarty Switch can be configured for optimum use. Smart Wizard Configuration Before entering the Web-based Management Utility, When The Smart Wizard will guide you to quick configure some functions. If you don’t plan to change anything, click Exit to exit the Wizard and enter the Web Interface.
5 Configuration D-Link Web Smart Switch User Manual SNMP Settings The SNMP Setting allows you to quick enable/ disable the SNMP function and configure the SNMP community name. For detail SNMP function description please see “Setup Menu > System > SNMP Settings”. The default SNMP Setting is Disabled. Click Enabled the Apply to configure Community Settings. Public: Read-only privilege allows authorized management stations to retrieve MIB objects.
5 Configuration D-Link Web Smart Switch User Manual System Settings By selecting Static and clicking Apply you can manually change the system IP Address, Subnet Mask, and Gateway address. You can further configure and read more about the above settings in the “Setup Menu > System > System Settings”. The default setting of System IP address is DHCP.
5 Configuration D-Link Web Smart Switch User Manual Figure 31 – Web-based Management Utility This is the Web-based Management Utility. Here you will see a Tools menu bar on top, a Function Tree, and the Main Configuration Screen. In the Tools menu, you can Reset, Config Backup and Restore, Firmware Backup and Upload, and System Reboot. Next to the Tools menu is the Smart Wizard button. By clicking this you can return to the Smart Wizard if you wish to make any changes there.
5 Configuration D-Link Web Smart Switch User Manual Tool Menu The Tool Menu offers global function controls such as Reset, Configuring Backup and Restoration, Firmware Backup and Upload, and System Reboot. Figure 32 – Tool Menu Reset Provide a safe reset option for the Switch. All configurations will be reset to default. Click Factory Reset to restore the settings to default values.
5 Configuration D-Link Web Smart Switch User Manual System Reboot Provide a safe way to reboot the system. Click System Reboot to restart the switch. Figure 36 – Tool Menu > System Reboot Setup Menu All configuration options on the switch are accessed through the Setup menu on the left side of the screen. Click on the setup item that you want to configure. The following sections describe in more detail each of the features and functions.
5 Configuration D-Link Web Smart Switch User Manual Figure 38 – System > System Setting System > Trap Settings By configuring the Trap Setting, it allows SmartConsole Utility to monitor specified events on this Web-Smart Switch. By default, Trap Setting is disabled. When the Trap Setting is enabled, enter the Destination IP address of the managing station that will receive trap information.
5 Configuration D-Link Web Smart Switch User Manual System > Port Settings In the Port Setting page, the status of all ports can be monitored and adjusted for optimum configuration. By selecting a range of ports (From Port and To Port), the Speed can be set for all such ports, by clicking Apply. To refresh the information table to view the latest Link Status and Priority, press the Refresh button. Figure 40 – System > Port Setting Speed: Gigabit Fiber connections can operate in Auto Mode or Disable.
5 Configuration D-Link Web Smart Switch User Manual Figure 41 – System > SNMP Setting Community Setting: In support of SNMP version 1, the Web-Smart Switch accomplishes user authentication by using Community Settings that function as passwords. The remote user SNMP application and the Switch SNMP must use the same community string. SNMP packets from a station that are not authenticated are ignored (dropped). The default community strings for the Switch used for SNMP v.
5 Configuration D-Link Web Smart Switch User Manual Figure 42 – System > Password Access Control Configuration > 802.1Q VLAN A VLAN is a group of ports that can be anywhere in the network, but communicate as though they were in the same area.
5 Configuration D-Link Web Smart Switch User Manual Figure 45 – Configuration > 802.1Q VLAN > Example VIDs Figure 46 – Configuration > 802.1Q VLAN > VID Assignments Configuration >Asymmetric VLAN This function is located in the 802.1Q Configuration page; it allows devices in different VLANs to communicate with the servers, firewalls or other shared resource in the shared VLAN. This configuration is accomplished in three steps: 1. Enabling Asymmetric VLAN 2. Creating VLAN 3.
5 Configuration D-Link Web Smart Switch User Manual Figure 48 – Configuration > 802.1Q VLAN > Example of Asymmetric VLAN 1. Enable Asymmetric VLAN and click “Apply” button. The overlapping VLAN cannot be configured unless this function is enabled. 2. Configure the VLAN settings. For example ports that are shared in the network are: ‧Ports 15-18 are connected to the server ‧Port 20 is connected to the firewall Therefore, this group of ports needs to be included for all the VLANs.
5 Configuration D-Link Web Smart Switch User Manual Figure 50 – Configuration > 802.1Q Management VLAN Configuration > Trunking The Trunking function enables the cascading of two or more ports for a combined larger bandwidth. Up to six Trunk groups may be created, each supporting up to 8 ports. Add a Trunking Name and select the ports to be trunked together, and click Apply to activate the selected Trunking groups.
5 Configuration D-Link Web Smart Switch User Manual Figure 52 – Configuration > IGMP Snooping Configuration By default, IGMP is disabled. If enabled, the IGMP Global Settings will need to be entered: Querier State: D-Link Smart Switch is able to send out the IGMP Queries to check the status of multicast clients. Default is disabled. Query Interval (60-600 sec): The Query Interval is the interval between General Queries sent.
5 Configuration D-Link Web Smart Switch User Manual Figure 53 – Configuration > IGMP Router port Settings To view the Multicast Entry Table for a given VLAN, press the View button. Figure 54 – Configuration > IGMP Multicast Entry Table Configuration > 802.1D Spanning Tree 802.1D Spanning Tree Protocol (STP) implementation is a backup link(s) between switches, bridges or routers designed to prevent network loops that could cause a broadcast storm.
5 Configuration D-Link Web Smart Switch User Manual detection of failed links, and thus faster topology adjustment. A draw-back of 802.1D is this absence of immediate feedback from adjacent bridges. After enabling STP, setting the STP Global Setting includes the following options: Bridge Priority: This value between 0 and 65535 specifies the priority for forwarding packets: the lower the value, the higher the priority. The default is 32768.
5 Configuration D-Link Web Smart Switch User Manual Selection options for the Source Ports are as follows: TX (transmit) mode: Duplicates the data transmitted from the source port and forwards it to the Target Port. Click “all” to include all ports into port mirroring. RX (receive) mode: Duplicates the data that gets sent to the source and forwards it to the Target Port. Click “all” to include all ports into port mirroring.
5 Configuration D-Link Web Smart Switch User Manual Figure 58 – PoE > PoE Port Setting PoE Enable: Select to enable or disable the PoE function by ports. Power Limit: This function allows you to manually set the port power current limitation to be given to the PD. To protect the DES-1228P and the connected devices, the power limit function will disable the PoE function of the port when the power is overloaded. Select from "Class 1", "Class 2", "Class 3" and "Auto" for the power limit.
5 Configuration D-Link Web Smart Switch User Manual VoIP (voice-over Internet Protocol), web browsing applications, file server applications or video conferencing. Thus with larger bandwidth, less critical traffic is limited, and therefore excessive bandwidth can be saved. The following figure displays the status of Quality of Service priority levels of each port, higher priority means the traffic from this port will be first handled by the switch.
5 Configuration D-Link Web Smart Switch User Manual remaining packets. D-Link Smart Switch system’s weight of priority levels are: 8 (Highest), 4 (High), 2 (Middle) and 1 (Low) packet. By default, the queuing mechanism is Strict. You may select From Port / To Port to configure the priority of each port. Security > Trusted Host Use Trusted Host function to manage the switch from a remote station.
5 Configuration D-Link Web Smart Switch User Manual Figure 64 – Security > Broadcast Storm Control 38
5 Configuration D-Link Web Smart Switch User Manual Security > 802.1X Settings Network switches provide easy and open access to resources by simply attaching a client PC. Unfortunately this automatic configuration also allows unauthorized personnel to easily intrude and possibly gain access to sensitive data. IEEE-802.1X provides a security standard for network access control, especially in Wi-Fi wireless networks. 802.1X holds a network port disconnected until authentication is completed.
5 Configuration D-Link Web Smart Switch User Manual Security > Mac Address Table > Static Mac This page provides two distinct features. The top table provides the ability to turn off auto learning Mac address if a port isn't connected to an uplink Switch (i.e. DHCP Server). By default, this feature is Off (disabled). The Macs listed on this table may only connect from corresponding ports and VIDs, in order to protect the network from illegal Macs.
5 Configuration D-Link Web Smart Switch User Manual Monitoring > Statistics The Statistics screen displays the status of each port packet count. Figure 68 – Monitoring > Statistics Refresh: To renew the details collected and displayed. Clear Counter: To reset the details displayed. TxOK: Number of packets transmitted successfully. RxOK: Number of packets received successfully. TxError: Number of transmitted packets resulting in error. RxError: Number of received packets resulting in error.
5 Configuration D-Link Web Smart Switch User Manual Monitoring > Cable Diagnostics The Cable Diagnostics is designed primarily for administrators and customer service representatives to view tests of the copper cables. It rapidly determines the type of cable errors occurred in the cable. Select a port and then click the Test Now button to view the diagnosis. Figure 70 – Monitoring > Cable Diagnostic Test Result: The description of the cable diagnostic results. ‧OK means the cable is fine.
Appendix A - Ethernet Technology D-Link Web Smart Switch User Manual Appendix A - Ethernet Technology This chapter will describe the features of the DES-1228P and provide some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.
Appendix A - Ethernet Technology D-Link Web Smart Switch User Manual Power and Data are integrated onto the same cable. Supporting category 5/5e up to 100 Meters, PoE will provide power to PoE compatible devices, such as IP telephones, wireless LAN access points, and IP security cameras. PoE is already widely adopted in the market, saving up to 50% of overall installation costs by eliminating the need to install separate electrical wiring and power outlets.
Appendix B - Technical Specifications D-Link Web Smart Switch User Manual Appendix B - Technical Specifications Power Budget: 170W max Auto discovery Auto disable port if the port current is over 350mA Following the standard classification 0(15.4W), 1(4.0W), 2(7.0W), 3(15.4W), 4(15.4W) Hardware Specifications Key Components / Performance Switching Capacity: - DES-1228: 12.8Gbps - DES-1228P: 12.8Gbps - DES-1252: 17.6Gbps Max. Forwarding Rate - DES-1228: 9.52Mpps - DES-1228P: 9.52Mpps - DES-1252: 13.
Appendix B - Technical Specifications D-Link Web Smart Switch User Manual Trap setting for destination IP, system events, fiber port events, twisted-pair port events Port access control Web-based configuration backup / restoration Web-based firmware backup/upload Firmware upgrade using SmartConsole Utility Reboot 2
TECHNICAL SUPPORT Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Technical Support You can find software updates and user documentation on the D-Link websites. If you require product support, we encourage you to browse our FAQ section on the Web Site before contacting the Support line. We have many FAQ’s which we hope will provide you a speedy resolution for your problem. For Customers within The United Kingdom & Ireland: D-Link UK & Ireland Technical Support over the Internet: http://www.dlink.co.uk ftp://ftp.dlink.co.
Technische Unterstützung Aktualisierte Versionen von Software und Benutzerhandbuch finden Sie auf der Website von D-Link. D-Link bietet kostenfreie technische Unterstützung für Kunden innerhalb Deutschlands, Österreichs, der Schweiz und Osteuropas. Unsere Kunden können technische Unterstützung über unsere Website, per E-Mail oder telefonisch anfordern. Web: http://www.dlink.de E-Mail: support@dlink.de Telefon: +49 (1805)2787 0,12€/Min aus dem Festnetz der Deutschen Telekom.
Assistance technique Vous trouverez la documentation et les logiciels les plus récents sur le site web D-Link. Vous pouvez contacter le service technique de D-Link par notre site internet ou par téléphone. Support technique destiné aux clients établis en France: Assistance technique D-Link par téléphone : 0820 0803 03 N° INDIGO - 0,12€ TTC/min* *Prix en France Métropolitaine au 3 mars 2005 Du lundi au samedi – de 9h00 à 19h00 Assistance technique D-Link sur internet : http://www.dlink.
Asistencia Técnica Puede encontrar las últimas versiones de software así como documentación técnica en el sitio web de D-Link. D-Link ofrece asistencia técnica gratuita para clientes residentes en España durante el periodo de garantía del producto. Asistencia Técnica de D-Link por teléfono: +34 902 30 45 45 Lunes a Viernes de 9:00 a 14:00 y de 15:00 a 18:00 Asistencia Técnica de D-Link a través de Internet: http://www.dlink.es/support/ e-mail: soporte@dlink.
Supporto tecnico Gli ultimi aggiornamenti e la documentazione sono disponibili sul sito D-Link. Supporto tecnico per i clienti residenti in Italia D-Link Mediterraneo S.r.L. Via N. Bonnet 6/B 20154 Milano Supporto Tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato Telefono: 199 400057 URL : http://www.dlink.it/supporto.html Email: tech@dlink.
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within Benelux for the duration of the warranty period on this product. Benelux customers can contact D-Link technical support through our website, or by phone. Tech Support for customers within the Netherlands: D-Link Technical Support over the Telephone: 0900 501 2007 Monday to Friday 9:00 am to 10:00 pm D-Link Technical Support over the Internet: www.dlink.
Pomoc techniczna Najnowsze wersje oprogramowania i dokumentacji użytkownika można znaleźć w serwisie internetowym firmy D-Link. D-Link zapewnia bezpłatną pomoc techniczną klientom w Polsce w okresie gwarancyjnym produktu. Klienci z Polski mogą się kontaktować z działem pomocy technicznej firmy D-Link za pośrednictwem Internetu lub telefonicznie. Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: URL: http://www.dlink.
Technická podpora Aktualizované verze software a uživatelských příruček najdete na webové stránce firmy D-Link. D-Link poskytuje svým zákazníkům bezplatnou technickou podporu Zákazníci mohou kontaktovat oddělení technické podpory přes webové stránky, mailem nebo telefonicky Web: http://www.dlink.cz/suppport/ E-mail: support@dlink.cz Telefon: 224 247 503 Telefonická podpora je v provozu: PO- PÁ od 09.00 do 17.
Technikai Támogatás Meghajtó programokat és frissítéseket a D-Link Magyarország weblapjáról tölthet le. Telefonon technikai segítséget munkanapokon hétfőtől-csütörtökig 9.00 – 16.00 óráig és pénteken 9.00 – 14.00 óráig kérhet a (1) 461-3001 telefonszámon vagy a support@dlink.hu emailcímen. Magyarországi technikai támogatás : D-Link Magyarország 1074 Budapest, Alsóerdősor u. 6. – R70 Irodaház 1 em. Tel. : 06 1 461-3001 Fax : 06 1 461-3004 email : support@dlink.hu URL : http://www.dlink.
Teknisk Support Du kan finne programvare oppdateringer og bruker dokumentasjon på D-Links web sider. D-Link tilbyr sine kunder gratis teknisk support under produktets garantitid. Kunder kan kontakte D-Links teknisk support via våre hjemmesider, eller på tlf. Teknisk Support: D-Link Teknisk telefon Support: 800 10 610 (Hverdager 08:00-20:00) D-Link Teknisk Support over Internett: http://www.dlink.
Teknisk Support Du finder software opdateringer og brugerdokumentation på D-Link’s hjemmeside. D-Link tilbyder gratis teknisk support til kunder i Danmark i hele produktets garantiperiode. Danske kunder kan kontakte D-Link’s tekniske support via vores hjemmeside eller telefonisk. D-Link teknisk support over telefonen: Tlf. 7026 9040 Hverdager: kl. 08:00 – 20:00 D-Link teknisk support på Internettet: http://www.dlink.
Teknistä tukea asiakkaille Suomessa: D-Link tarjoaa teknistä tukea asiakkailleen. Tuotteen takuun voimassaoloajan. Tekninen tuki palvelee seuraavasti: Arkisin klo. 9 - 21 numerosta 0800-114 677 Internetin kautta Ajurit ja lisätietoja tuotteista. http://www.dlink.fi Sähköpostin kautta voit myös tehdä kyselyitä.
Teknisk Support På vår hemsida kan du hitta mer information om mjukvaru uppdateringar och annan användarinformation. D-Link tillhandahåller teknisk support till kunder i Sverige under hela garantitiden för denna produkt. Teknisk Support för kunder i Sverige: D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08.00-20.00 D-Link Teknisk Support via Internet: http://www.dlink.
Suporte Técnico Você pode encontrar atualizações de software e documentação de utilizador no site de D-Link Portugal http://www.dlink.pt. A D-Link fornece suporte técnico gratuito para clientes no Portugal durante o período de vigência de garantia deste produto. Suporte Técnico para clientes no Portugal: Assistência Técnica: Email: soporte@dlink.es http://www.dlink.pt/support/ ftp://ftp.dlink.
Τεχνική Υποστήριξη Μπορείτε να βρείτε software updates και πληροφορίες για τη χρήση των προϊόντων στις ιστοσελίδες της D-Link Η D-Link προσφέρει στους πελάτες της δωρεάν υποστήριξη στον Ελλαδικό χώρο Μπορείτε να επικοινωνείτε με το τμήμα τεχνικής υποστήριξης μέσω της ιστοσελίδας ή μέσω τηλεφώνου Για πελάτες εντός του Ελλαδικού χώρου: Τηλεφωνική υποστήριξη D-Link : Τηλ: 210 86 11 114 Φαξ: 210 86 53 172 (Δευτέρα-Παρασκευή 09:00-17:00) e-mail: support@dlink.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 Monday to Friday 8:00am to 8:00pm EST Saturday 9:00am to 1:00pm EST http://www.dlink.com.au e-mail: support@dlink.com.au India: Tel: 1800-222-002 Monday to Friday 9:30AM to 7:00PM http://www.dlink.co.in/support/productsupport.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Egypt: Tel: +202-2919035 or +202-2919047 Sunday to Thursday 9:00am to 5:00pm http://support.dlink-me.com e-mail: amostafa@dlink-me.com Iran: Tel: +98-21-88822613 Sunday to Thursday 9:00am to 6:00pm http://support.dlink-me.com e-mail: support.ir@dlink-me.com Israel: Tel: +972-9-9715701 Sunday to Thursday 9:00am to 5:00pm http://www.dlink.co.il/support/ e-mail: support@dlink.co.
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: +495-744-00-99 Техническая поддержка через Интернет http://www.dlink.ru e-mail: support@dlink.
Asistencia Técnica D-Link Latin América pone a disposición de sus clientes, especificaciones, documentación y software mas reciente a través de nuestro Sitio Web www.dlinkla.com El servicio de soporte técnico tiene presencia en numerosos países de la Región Latino América, y presta asistencia gratuita a todos los clientes de D-Link, en forma telefónica e internet, a través de la casilla soporte@dlinkla.
Suporte Técnico Você pode encontrar atualizações de software e documentação de usuário no site da D-Link Brasil www.dlinkbrasil.com.br. A D-Link fornece suporte técnico gratuito para clientes no Brasil durante o período de vigência da garantia deste produto. Suporte Técnico para clientes no Brasil: Telefone São Paulo +11-2185-9301 Segunda à sexta Das 8h30 às 18h30 Demais Regiões do Brasil 0800 70 24 104 E-mail: e-mail: suporte@dlinkbrasil.com.
D-Link 友訊科技 台灣分公司 技術支援資訊 如果您還有任何本使用手冊無法協助您解決的產品相關問題，台灣 地區用戶可以透過我們的網站、電子郵件或電話等方式與D-Link台灣 地區技術支援工程師聯絡。 D-Link 免付費技術諮詢專線 0800-002-615 服務時間：週一至週五，早上8:30到晚上9:00 (不含周六、日及國定假日) 網 站：http://www.dlink.com.tw 電子郵件：dssqa_service@dlink.com.tw 如果您是台灣地區以外的用戶，請參考D-Link網站全球各地 分公司的聯絡資訊以取得相關支援服務。 產品保固期限、台灣區維修據點查詢，請參考以下網頁說明： http://www.dlink.com.
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.
技術支持 您可以在 D-Link 的官方網站找到產品的軟件升級和使用手冊 办公地址：北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 技术支持中心电话：8008296688/ (028)66052968 技术支持中心传真：(028)85176948 维修中心地址：北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 维修中心电话：(010) 58257789 维修中心传真：(010) 58257790 网址：http://www.dlink.com.
International Offices U.S.A 17595 Mt. Herrmann Street Fountain Valley, CA 92708 TEL: 1-800-326-1688 URL: www.dlink.com Canada 2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1-905-8295033 FAX: 1-905-8295223 URL: www.dlink.ca Europe (U. K.) D-Link (Europe) Ltd D-Link House, Abbey Road Park Royal, London NW10 7BX United Kingdom TEL: +44 (0)20 8955 9000 FAX: +44 (0)20 8955 9001 URL: www.dlink.co.
