User's Manual

28D-Link DWA-525 User Manual
Section 4 - Wireless Security
Congure WPA
™
/WPA2
™
- Personal
Using the D-Link Utility
It is recommended to enable WPA/WPA2-Personal on your wireless router or access point before conguring your wireless
adapter.Ifyouarejoininganexistingnetwork,youwillneedtoknowtheWPA/WPA2-Personalpassphrasebeingused.
1. Open the Wireless Connection Manager by double-clicking on the D-Link
icon on your desktop.
2. Highlightthewirelessnetwork(SSID)youwouldliketoconnecttoandclick
Connect.IfthenetworkisusingWPA/WPA2-Personal,thescreen(asshown
tothebottom-right)willappear.
3. Enter the WPA/WPA2-Personal passphrase exactly as it is on your wireless
router or access point. Click the Show text in the password eld box to see
the passphrase. Unchecking it will hide it.
4. Click OK to connect to the network. Allow up to 30 seconds to connect.
IfyouwouldliketocreateanewnetworkandentertheWPA/WPA2-Personalsettings,
refer to the next page.