Version 1.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date 1.00 April 5, 2017 Description Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Table of Contents Preface.................................................................................. i Product Overview............................................................... 1 Package Contents.......................................................................... 1 System Requirements.................................................................. 2 Introduction.................................................................................... 3 Features...........
Table of Contents Dynamic DNS........................................................................58 IGMP.........................................................................................59 Web Filter................................................................................60 Management.................................................................................61 Time & Schedule..................................................................61 Time....................................
Section 1 - Product Overview Product PackageOverview Contents DSL-3785 Wireless AC1200 Dual-Band ADSL2+/VDSL2 Modem Router Power Adapter Ethernet Cable Phone Cable If any of the above items are missing, please contact your reseller. Note: Using a power supply other than the one included with the DSL-3785 may cause damage and void the warranty for this product.
Section 1 - Product Overview System Requirements Network Requirements Web-based Configuration Utility Requirements • An active subscription with an Internet Service Provider using one of the following connection types: • A VDSL/ADSL connection to a telephone line using the DSL port • An 802.11ac/n/g/b/a wireless or Ethernet port Computer with the following: • Microsoft Windows® 10/8/7/Vista/XP SP3 or Mac with OS X 10.
Section 1 - Product Overview Introduction The D-Link DSL-3785 Wireless AC1200 Dual-Band ADSL2+/VDSL2 Modem Router shares your DSL Internet connection over blazing fast Wireless AC. It also comes equipped with a USB port, and four Gigabit Ethernet 10/100/1000 ports. The DSL-3785's USB sharing technology lets you take advantage of file sharing.
Section 1 - Product Overview Features • Faster Wireless Networking - The DSL-3785 is dual-band capable of up to a full 1200 Mbps* for you wireless devices. It operates on both the 2.4 GHz and 5 GHz bands to allow separation of traffic so users can participate in high-bandwidth activities, such as video streaming, online gaming, and real-time audio, without affecting low-priority traffic like email and web surfing. • Compatible with 802.
Section 1 - Product Overview Hardware Overview Back Panel 1 2 3 4 5 1 Power connector 2 USB 2.0 port 3 Giga Ethernet ports (1-4) Connects to network devices such as computers, switches, storage (NAS) devices and game consoles at speeds of up to 1000 Mbps. 4 Reset button To reset the device to its factory default settings, use a paper clip to press and hold the reset button for 5 seconds. 5 DSL port D-Link DSL-3785 User Manual Connector for the supplied power adapter.
Section 1 - Product Overview Side Panel 1 2 1 WPS button 2 Power button D-Link DSL-3785 User Manual Press to start the WPS process and automatically create a secure connection to a WPS client. Press the power button to power the DSL-3785 on and off.
Section 1 - Product Overview Hardware Overview LEDs 1 1 Power A solid green light indicates a proper connection to a DSL-enabled telephone line. Broadband Blinking green A blinking green light indicates the DSL port is negotiating a connection. Internet Wireless Solid red Solid green D-Link DSL-3785 User Manual A solid red light indicates a PPP or DHCP failure. Check your username and password.
Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage. Note: This installation section is written for users who are setting up their home Internet service with the DSL-3785 Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router for the first time.
Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Section 2 - Installation Manual Setup 1 Position your DSL-3785 near your PC and a telephone wall jack which provides DSL service. Keep the modem router in an open area for better wireless coverage. PC DSL-3785 2 Phone Plug one end of the supplied DSL phone cable into the DSL port on the back of the modem router, and the other end into the telephone wall jack. Note: If a DSL microsplitter/microfilter is included in the package contents, install it in line with your telephone wall jack.
Section 2 - Installation 3 Connect the supplied power adapter to the modem router and a power outlet, and press the power button. The device LEDs will light up. Wait approximately three minutes before moving on to step 4. Caution: Use only the included power adapter with this product. Phone PC Power DSL-3785 Plug one end of the supplied Ethernet cable into a yellow Ethernet port on the back of the modem router, and the other end into the Ethernet port on your computer.
Section 3 - Getting Started Getting Started There are two ways you can configure your router to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to Setup Wizard on page 13. • Manual Setup - Log into the router and manually configure your router. Refer to Configuration on page 19.
Section 3 - Getting Started Setup Wizard If this is your first time using the router, open your web browser and enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.1.1). The default password is admin. The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Ensure that your DSL phone cable is connected to both the router and the wall jack.
Section 3 - Getting Started Setup Wizard (continued) If the router cannot determine your connection type, a list of connection types to choose from will be displayed. Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue. If the router detected or you selected PPPoE, enter your PPPoE username and password, choose the Connection Type if asked, and click Next to continue.
Section 3 - Getting Started Setup Wizard (continued) If the router detected or you selected PPPoA, enter your PPPoA username and password, choose the Connection Type if asked, and click Next to continue. Note: Make sure to remove your PPPoA software from your computer. The software is no longer needed and will not work through a router. PPPoA connection type is only available for ADSL connections.
Section 3 - Getting Started Setup Wizard (continued) If the router detected or you selected Dynamic IP Address (DHCP), choose the Connection Type if asked. Click Next to continue. If you selected Bridge, choose the Connection Type if asked. Click Next to continue.
Section 3 - Getting Started Setup Wizard (continued) Create a Wi-Fi SSID and password for both the 2.4 GHz and 5 GHz wireless networks. The SSIDs must be between 3 and 32 alphanumeric characters in length and may include hyphens, underscores, periods, and the @ symbol. The passwords must be between 8 and 63 alphanumeric characters in length. Your wireless clients must use these SSIDs and passwords in order to connect to your wireless networks. Click Next to continue.
Section 3 - Getting Started Setup Wizard (continued) The Summary window will display your settings. Click Next if you are satisfied, or click Back to make changes to them. The wizard will close and your settings will be saved. Congratulations, setup is complete.
Section 4 - Configuration Configuration To access the configuration utility, open a web browser such as Internet Explorer and enter http://dlinkrouter.local./ Windows and Mac users may also connect by typing the IP address of the router (by default this is http://192.168.1.1) in the address bar. Input the default password as admin. If you previously followed the Setup Wizard (see page 13), please use the admin password you entered during the wizard. Click Log In to proceed.
Section 4 - Configuration Internet To bring up more details about your Internet connection, click on the Internet icon. The Internet Connection status at the top of the diagram will reflect the status of the currently selected WAN interface. If your Internet is disconnected, indicated by a red X, you can launch the Setup Wizard to correct the issue by clicking Wizard from the Settings menu on the bar on the top of the page.
Section 4 - Configuration IPv4 Click the IPv4 button to see the IPv4 information for the DSL interface. If you have configured your ADSL/VDSL connection to use PPPoE with On-Demand or Manual settings, you can connect to or disconnect from the Internet by pressing the Connect or Disconnect buttons. IPv4 DSL Type: Displays the current DSL type, either ADSL or VDSL. Cable Status: Displays the current cable connection status. Link Rate: Displays the currently negotiated connection speed.
Section 4 - Configuration DSL Click the DSL button to see the DSL port connection information. The DSL tab displays information regarding the DSL data connection. DSL Line State: Displays the current status of the data link connection to your ISP. Modulation: Displays the current DSL standard in use. Annex Mode: Displays the current Annex mode in use. DSL (Sync) Displays the DSL connection uptime. Uptime: SNR Margin: Displays the Signal-to-noise margin.
Section 4 - Configuration D-Link Click on the D-Link icon to view details about the router and its wireless settings. Here you can see the router’s current wireless networks and passwords, as well as the local area network MAC and IPv4 addresses. To reconfigure the network settings, click the Go to settings link, from the Settings menu at the top of the page, select Network. Refer to page Network on page 44 for more information.
Section 4 - Configuration Connected Clients Click on the Connected Clients icon to view details about the clients currently connected to the router and their IP addresses. To edit each client’s settings, click the pencil icon on the client you want to edit. Edit Rule Name: Enter a custom name for this client. Vendor: Displays the vendor of the device. MAC Address: Displays the MAC address of the device. IP Address: Enter a specific IP address for this client if Reserve IP is enabled.
Section 4 - Configuration USB Device Click on the USB Device icon to view details about the currently connected USB device, DLNA Media Server, SharePort, and Windows File Sharing settings. If you have a USB device connected, you can see its name and how much free space it has. To safely disconnect your USB drive, click Unmount. To configure your USB settings, click Go to settings and refer to page USB Device on page 25 for more information.
Section 4 - Configuration Settings Wizard To access the Setup Wizard page, click Wizard from the Settings menu on the bar on the top of the page. This is the same wizard that appears when you start the router for the first time. Refer to Setup Wizard on page 13 for more information. Internet The following pages will describe how to manually configure how your DSL-3785 connects to the Internet. To access this page, click Internet from the Settings menu on the bar on the top of the page.
Section 4 - Configuration ADSL ADSL is one of the first home broadband technologies introduced. ADSL uses the DSL port on your DSL-3785 to connect to the Internet. In order for your DSL-3785 to use ADSL, you must configure the ATM VC Settings and your WAN Settings. Configure your Select ADSL to configure ADSL connection settings. WAN connection: If you click on Advanced Settings, the following WAN Settings are available: ATM VC Settings Interface: Select the interface from the drop-down menu.
Section 4 - Configuration ADSL (continued) If you selected CBR, NRT-VBR, or RT-VBR, the additional following options are available: Peak Cell Rate Enter the Peak Cell Rate in cells per second. (PCR): If you selected NRT-VBR or RT-VBR, the additional following options are available: Sustainable Cell Enter the Sustainable Cell Rate in cells per second. Rate(SCR): Maximum Burst Enter the Maximum Burst Size in MB per second.
Section 4 - Configuration VDSL VDSL is one of the latest and fastest home broadband technologies. VDSL uses the DSL port on your DSL-3785 to connect to the Internet. In order for your DSL-3785 to use VDSL, you must configure the ATM VC Settings and your WAN Settings. Configure your Select VDSL to configure ADSL connection settings. WAN connection: If you click on Advanced Settings, the following WAN Settings are available: PTM VC Settings Service Number: Select the service number from the drop-down menu.
Section 4 - Configuration WAN Settings Dynamic IP (DHCP) Select Dynamic IP Address (DHCP) to obtain an IP address automatically from your ISP. Select this option if your ISP does not provide you with a specific IP address. WAN Settings Connection: Select Dynamic IP Address (DHCP). WAN Connection Type: Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed IP VC-Mux. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.
Section 4 - Configuration Static IP Select Static IP if your ISP provides you with a specific IP address. WAN Settings Connection: Select Static IP Address. WAN Connection Type: Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed IP VC-Mux. IP Address: Enter the IP address provided by your ISP. Subnet Mask: Enter the subnet mask provided by your ISP. Default Gateway: Enter the default gateway address provided by your ISP.
Section 4 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. WAN Settings Connection: Select PPPoE. WAN Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Connection Type: Select PPPoE LLC or PPPoE VC-Mux. Service Name: Enter name of your service. (Optional) AC name: Enter the AC name.
Section 4 - Configuration PPPoE If you click enabled Connect-On-Demand, the following option is available: Maximum Idle Enter the amount of time the router will maintain the Internet Time: connection before disconnecting if there is no activity. Click Save when you are done.
Section 4 - Configuration PPPoA Select PPPoA if your ISP provides and requires you to enter a PPPoA username and password in order to connect to the Internet. For ADSL connections only. WAN Settings Connection: Select PPPoA. WAN Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Connection Type: Select PPPoA LLC or PPPoA VC-Mux. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.
Section 4 - Configuration Bridge Mode Select Bridge Mode to use the DSL-3785 as a network bridge. WAN Settings Connection: Select Bridge. WAN Connection Type: Select Bridged Only LLC or Bridged Only VC-Mux. Enable Large Enable or disable 1514 byte packet support. Package passthrough: Click Save when you are done. You will need to connect and configure another device to connect to your ISP.
Section 4 - Configuration Wireless From this page you can configure your wireless network settings. To access this page, click Wireless from the Settings menu on the bar on the top of the page. 2.4 GHz Status: Enable or disable the 2.4 GHz wireless network. SSID: Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. 5 GHz Status: Enable or disable the 5 GHz wireless network.
Section 4 - Configuration Advanced Settings Clicking Advanced Settings allows you to manually configure security, wireless radio operation, and schedule settings. Security: Choose None, WEP-64Bit, WEP-128Bit, WPA2, or WPA/WPA2. WPA2 Using WPA2 with AES encryption is recommended. Using it you can be reasonably assured that your wireless connection is secure. Security: WPA2 WPA Type If you select 802.1x the following options are available: Server IP Address: Enter the IP address of the RADIUS Server.
Section 4 - Configuration Advanced Settings (continued) WPA/WPA2 WPA/WPA2 is a reasonably strong wireless security encryption type. Use this for wireless clients which do not support WPA2 encryption. Security: WPA/WPA2 WPA Type If you select 802.1x the following options are available: Server IP Address: Enter the IP address of the RADIUS Server. Port: Enter the port used by the RADIUS Server. Secret: Enter the secret used by the RADIUS Server. Cipher Type: Select AES, TKIP, or Both. AES is recommended.
Section 4 - Configuration Advanced Settings (continued) WEP-64Bit or WEP-128Bit Use of WEP encryption is not recommended, as it only offers a trivial amount of protection for your wireless data. Unless your clients do not support WPA encryption, it is recommended that you select WPA2 or WPA/WPA2 Mixed instead of WEP as they are more secure. Security: WEP-64Bit or WEP-128Bit. Auth Type: Select either Open or Shared. None Disabling encryption and leaving your wireless network open is not recommended.
Section 4 - Configuration Advanced Settings (continued) 2.4 GHz / 5 GHz Advanced Settings Hide SSID: The default setting is Disabled. Select Enabled if you do not want to broadcast the SSID of your wireless network. Note: Hiding your SSID is not a form of security alone. WMM: Enable or disable WMM QoS for your wireless network. This can help to improve the quality of video and voice applications for your wireless clients. Wi-Fi Protected Enabled or disable WPS functionality of this device.
Section 4 - Configuration Advanced Settings (continued) 2.4 GHz Channel Channel Width is available if you select Mixed 11N/G/B, 11N/G, or Width: 11N for 802.11 Mode. Select 20/40 if you are using both 802.11n and non-802.11n devices, or select 20 MHz if you want to disable 40 MHz bandwidth communication. The recommended setting is 20/40. Extension If 20/40 2.
Section 4 - Configuration Advanced Wireless Configuration (continued) Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 62 for more information. Click Save when you are done.
Section 4 - Configuration Guest Zone The Guest Zone feature will allow you to create wireless networks that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. To access this page, click Wireless from the Settings menu on the bar on the top of the page and click Guest Zone. 2.4 GHz / 5 GHz Status: Enable or disable the selected SSID.
Section 4 - Configuration Network This section will allow you to change the local network settings of the router and to configure the DHCP settings. To access this page, click Network from the Settings menu on the bar on the top of the page. Router Settings Router IP Address: Enter the IP address of the router for this interface. The default IP address is 192.168.1.1.
Section 4 - Configuration Network - Advanced Settings Advanced Settings You may select one of the following DHCP mode behaviors: Disable DHCP Select this option to disable the DHCP server. No further configuration Server: is available. Enable DHCP Select this option to enable the DHCP server. Server: DHCP Relay: Select this option to enable DHCP Relay. Use this if you have a dedicated DHCP server on your network.
Section 4 - Configuration Network - Advanced Settings If you selected DHCP Relay, the following options are available: Server IP: Enter the DHCP server IP address. Click Save when you are done.
Section 4 - Configuration USB This page will allow you to set up access to files on an external USB device plugged into the router. You can do this through the local network. To access this page, click USB from the Settings menu on the bar on the top of the page. DLNA Settings DLNA: Enable or disable the DLNA media server functions, allowing connected DLNA clients access to media files over the network. Samba Setup Samba: Enable or disable Windows File Sharing, or Samba.
Section 4 - Configuration Features Firewall The router’s firewall protects your network from malicious attacks over the Internet. To access this page, click Firewall from the Features menu on the bar on the top of the page. It is recommended to leave all values at their default Enable setting.
Section 4 - Configuration Application Port triggering allows ports to be opened when traffic is detected on specified ports. This is used for facilitating communication between applications and servers behind a NAT firewall. To access this page, click Application from the Features menu on the bar on the top of the page. The currently defined Application rules are displayed in the table. Some commonly used Applications are pre-configured by default. You may create up to eight application rules.
Section 4 - Configuration ACL The Access Control List (ACL) page allows you to enable or disable various services from being used on the LAN or WAN side. To access this page, click ACL from the Features menu on the bar on the top of the page. Access Control Setup ACL: Activate or deactivate ACLs. ACL Rule Index: Select the ACL rule index number from the drop down menu. Active: Activate or deactivate the individual ACL rule. Service IP address: Enter the IP address range to apply the rule to.
Section 4 - Configuration Port Forwarding Port forwarding allows you to specify a port or range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. To access this page, click Port Forwarding from the Features menu on the bar on the top of the page. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column.
Section 4 - Configuration Port Forwarding (continued) Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always, or you can create your own schedules in the Schedules section. Refer to Schedule on page 62 for more information. Click Apply when you are done.
Section 4 - Configuration DMZ (Exposed Host) This page allows you to manually configure the router’s DMZ settings. To access this page, click Port Forwarding from the Features menu on the bar on the top of the page and click DMZ (Exposed Host). Since some applications are not compatible with NAT, the device supports the use of a DMZ IP address for a single host on the LAN. This IP address is not protected by NAT and it is visible on the Internet with the correct type of software.
Section 4 - Configuration IP/MAC Filtering IP Filter The IP Filters page manages LAN users' access to the Internet. It is possible to permit access to the Internet for specified IP addresses within your LAN or to restrict access for specified IP addresses. You can also define filters for port access. To access this page, click IP/MAC Filtering from the Features menu on the bar on the top of the page.
Section 4 - Configuration IP Filter (continued) If you enabled IP filtering, click Add Rule to create a new IP filtering rule. Create New Rule Name: Create a name for the rule. Protocol: Select the protocol type: Any, UDP, TCP, or ICMP. Source IP Address: Select Any IP address, Single IP, or Specify IP Address (Range). If you selected Single IP or Specify IP Address (Range), enter the IP address into the From and To fields. Destination IP Select the destination to apply the rule to: PVC1, PTM, or WAN.
Section 4 - Configuration MAC Filter The MAC filter is used to restrict or allow certain types of Ethernet Frames through the gateway based on their source or destination MAC address. These filters are helpful in securing or restricting traffic on your local network. To access this page, click IP/MAC Filtering from the Features menu on the bar on the top of the page and then click the MAC Filter link. To return to the IP Filter page, click IP Filter.
Section 4 - Configuration Static Route The Static Routes section allows you to define custom routes to control how data traffic is moved around your network. To access this page, click Static Route from the Features menu on the bar on the top of the page. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done.
Section 4 - Configuration Dynamic DNS The Dynamic DNS page is used to Most Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server, no matter what your IP address is. To access this page, click Dynamic DNS from the Features menu on the bar on the top of the page. Enable Dynamic Enabling dynamic DNS will reveal further configuration options.
Section 4 - Configuration IGMP The Internet Group Management Protocol (IGMP) Transmission allows for the transmission of identical content, such as multimedia, from a source to a number of recipients. IGMP Snooping: Enable and disable Internet Group Management Protocol (IGMP) snooping to build multicast tables. ADSL Proxy: Check the box to enable the ADSL proxy. The currently configured interface is displayed below. IGMP Version: Select the IGMP version to use either V1/V2 or V3.
Section 4 - Configuration Web Filter The website filter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked). To access this page, click Web Filter from the Features menu on the bar on the top of the page. If you want to create a list of sites to block, select DENY computers access to ONLY these sites from the drop-down menu. All other sites will be accessible.
Section 4 - Configuration Management Time & Schedule Time The Time page allows you to configure, update, and maintain the correct time for the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time. To access this page, click Time & Schedule from the Management menu on the bar on the top of the page. Time: Displays the current date and time of the router.
Section 4 - Configuration Schedule Some configuration rules can be set according to a pre-configured schedule. To access this page, click Time & Schedule from the Management menu on the bar on the top of the page and click the Schedule link. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button.
Section 4 - Configuration Log Info The router keeps a running log of events. To access this page, click Log Info from the Management menu on the bar on the top of the page. System logging must be enabled in order for this feature to work. Refer to System Log on page 64 for information on how to enable the system log.
Section 4 - Configuration System Log This page controls how the System Log operates. This log can be sent to a Syslog server or saved to your local hard drive. To access this page, click Log Info from the Management menu on the bar on the top of the page and then click System Log. To return to the Log Info page, click Log Info. Save Log File Save log file to Click this button to save the log file to your local hard drive. local Hard Drive: Clear the Log info: Click this button to clear the system log.
Section 4 - Configuration System Settings This page allows you to save the router’s current configuration, load a previously saved configuration, reset the router to its factory default settings, or reboot the router. To access this page, click System Settings from the Management menu on the bar on the top of the page. Device Information Hardware Version: The hardware version of the router is displayed here. Firmware Version: The current firmware version is displayed here.
Section 4 - Configuration Admin This page will allow you to change the administrator (admin) password and enable remote management. To access this page, select System from the Management menu on the bar on the top of the page, and click Admin. To return to the System page, click System. Administrator Settings Password: Enter a new password for the admin account. You will need to enter this password whenever you configure the router using a web browser.
Section 4 - Configuration Firmware Upgrade This page will allow you to upgrade the router’s firmware. To access this page, click Firmware Upgrade from the Management menu on the bar on the top of the page. To upgrade the firmware, you must first download the relevant file from http://support.dlink.com. Firmware Information Current Firmware The current firmware’s version is displayed. Version: Firmware Date: The current firmware’s date is displayed.
Section 4 - Configuration Statistics This page gives you various statistics about data transmitted and received by your router through the Internet, on your wired network (LAN), and through your wireless networks. To access this page, click Statistics from the Management menu on the bar on the top of the page. You can view the statistics of the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz interfaces by clicking on their respective tabs at the top of the graph. The graph will update every few seconds.
Section 4 - Configuration Diagnostics This page is used to test the router's connection to the Internet. To access this page, click Diagnostics from the Management menu on the bar on the top of the page. Enter either an IP address or web address, select either Ping or Tracert test, and click Run Test. The results of the test will be displayed in the dialog box. You may copy the results by pressing the Copy button.
Section 5 - Connect and Share a USB Device Connect and Share a USB Device After you have successfully installed and configured your D-Link Modem Router, you are ready to enjoy the benefits of D-Link’s USB sharing technology. This allows you to quickly and easily share a USB storage device with multiple computers on your network. Connect and Share a USB Storage Device The DSL-3785 will share a FAT32 or NTFS-formatted USB storage device using the Samba file sharing protocol.
Section 5 - Connect and Share a USB Device Connecting from a Windows-Based PC Step 1 - Click the Start menu and select Computer.
Section 5 - Connect and Share a USB Device Step 2 - Click Map network drive.
Section 5 - Connect and Share a USB Device Step 3 - Select the drive letter you wish to map your network drive to. Enter the DSL-3785’s IP address and the name of the USB volume you wish to share. For example \\192.168.1.1\usb. Check the boxes Reconnect at logon and Connect using different credentials. Click Finish. If you have multiple USB storage devices attached via a USB hub, click USB Device from the Home section of the DSL-3785’s Web Configuration utility for a list of available volume names.
Section 5 - Connect and Share a USB Device Step 4 - Enter admin and the password to your router and click Ok.
Section 5 - Connect and Share a USB Device Congratulations! Your files are now shared. Repeat this process from each Windows PC you wish to share your USB drive with.
Section 5 - Connect and Share a USB Device Connecting from a Mac Step 1 - While in Finder, click Go menu and select Connect to Server...
Section 5 - Connect and Share a USB Device Step 2 - Enter the DSL-3785’s IP address and the name of the USB volume you wish to share. For example smb//192.168.1.1/usb1_1. Click Connect. If you have multiple USB storage devices attached via a USB Hub, consult the HOME>USB sectionof the DSL-3785’s Web Configuration utility for a list of available volume names.
Section 5 - Connect and Share a USB Device Step 4 - Enter admin and the password to your router and click Connect. If you wish to have your computer remember your password, check the Remember this password in my keychain box.
Section 5 - Connect and Share a USB Device Congratulations Your files are now shared. Repeat this process from each Mac you wish to share your USB drive with.
Section 6 - Connecting to a Wireless Network Connect a Wireless Client to Your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DSL-3785 router.
Section 6 - Connecting to a Wireless Network Windows® 10 When connecting to the DSL-3785 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here.
Section 6 - Connecting to a Wireless Network To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the Connect Automatically check box. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. Your computer will now automatically connect to this wireless network when it is detected.
Section 6 - Connecting to a Wireless Network Windows® 8 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar next to the time display.
Section 6 - Connecting to a Wireless Network You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function.
Section 6 - Connecting to a Wireless Network Windows® 7 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area.
Section 6 - Connecting to a Wireless Network 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router.
Section 6 - Connecting to a Wireless Network WPS The WPS feature of the DSL-3785 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side.
Section 6 - Connecting to a Wireless Network 3. Double-click the DSL-3785. DSL-3785 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.
Section 6 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue.
Section 6 - Connecting to a Wireless Network 7. The following window appears while the DSL-3785 is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the DSL-3785 has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup.
Section 6 - Connecting to a Wireless Network Windows Vista® Windows Vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a “site survey” option similar to the Windows Vista® utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility.
Section 6 - Connecting to a Wireless Network WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2.
Section 6 - Connecting to a Wireless Network 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.
Section 7 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DSL-3785. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to these examples. 1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.
Section 7 - Troubleshooting • Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Section 7 - Troubleshooting 3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL.
Section 7 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size.
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford.
Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.
Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.
Appendix A - Wireless Basics Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router.
Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter.
Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 7 Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows® XP Click on Start > Control Panel > Network Connections.
Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DSL-3785 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA (Wi-Fi Protected Access) • WPA2-PSK (Pre-Shared Key) • WPA-PSK (Pre-Shared Key) What is WPA? WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
Appendix C - Technical Specifications Technical Specifications Device Interfaces • One RJ-11 xDSL port • 802.11 ac/n/g/a/b Wireless LAN • Four 10/100/1000 Gigabit Ethernet LAN ports • One USB 2.0 port Standards • IEEE 802.11ac/n/g/a/b • IEEE 802.3/u/ab/x ADSL/ADSL2/ADSL2+ Standards • G.dmt/G.lite/G.hs/VBR • ITU-T G.992.5/ G.992.3/ G.992.4 VDSL Standards • ITU-T G.993.1/ G.993.2 • Profile 8a/8b/8c/8d/12a/12b/17a/30a Antenna Types • Two internal dual-band antennas Wireless Signal Rate1 • 2.
Appendix D - Regulatory Statements Regulatory Statements 5G 2.4 G Frequency Band(s) Frequenzband Fréquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) Max. Output Power (EIRP) Max. Output Power Consommation d’énergie max. Potencia máxima de Salida Potenza max. Output Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 1W 2.4 – 2.
Appendix D - Regulatory Statements European Community Declaration of Conformity: Česky [Czech] Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí 2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o firmwaru produktu lze stáhnout na stránkách k produktu www.dlink.com. Dansk [Danish] D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv 2014/53/EU.
Appendix D - Regulatory Statements Latviski [Latvian] Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai 2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā produkta lapā vietnē www.dlink.com. Lietuvių [Lithuanian] Šiuo dokumentu „D-Link Corporation“ pareiškia, kad šis gaminys, priedai ir programinė įranga atitinka direktyvą 2014/53/ES.
Appendix D - Regulatory Statements Íslenska [Icelandic] Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www. dlink.com. Norsk [Norwegian] Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet 2014/53/EU.
Appendix D - Regulatory Statements Notice of Wireless Radio LAN Usage in The European Community (For Wireless Product Only): • • This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries.
Appendix D - Regulatory Statements AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) • • Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz afin de réduire les risques d'interférences.
Appendix D - Regulatory Statements AVVISO PER L’USO DI LAN RADIO WIRELESS NELLA COMUNITÀ EUROPEA (SOLO PER PRODOTTI WIRELESS) • • Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.
Appendix D - Regulatory Statements SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. • Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. • Do not attempt to service the product and never disassemble the product.
Appendix D - Regulatory Statements CONSIGNES DE SÉCURITÉ Les consignes générales de sécurité ci-après sont fournies afin d’assurer votre sécurité personnelle et de protéger le produit d’éventuels dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails. • L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet en métal relié à la terre par exemple) avant de toucher le produit.
Appendix D - Regulatory Statements ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto. • L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto.
Appendix D - Regulatory Statements Disposing and Recycling Your Product ENGLISH EN This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free.
Appendix D - Regulatory Statements FRANÇAIS FR Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous aidez à préserver l’environnement et à protéger la santé de l’homme.
Appendix D - Regulatory Statements ITALIANO IT La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare.
Appendix D - Regulatory Statements POLSKI PL Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze.
Appendix D - Regulatory Statements MAGYAR HU Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők.
Appendix D - Regulatory Statements DANSK DK Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis.
Appendix D - Regulatory Statements SVENSKA SE Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.
