Smart WLAN Manager May 2007 Version 1.
Table of Contents Table of Contents ....................................................................................................................................................................2 Introduction .............................................................................................................................................................................4 System Requirement .......................................................................................................
D-Link Smart WLAN Manager User Manual Configure the Access Point by Group .................................................................................................................................25 Create a Group Template ...........................................................................................................................................25 Edit a Group Template......................................................................................................................
D-Link Smart WLAN Manager User Manual Introduction The Smart WLAN Manager is a convenient tool to manage the configuration of your network from a central computer. With Smart WLAN Manager there is no need to configure D-Link DWL-3140AP Wireless Access Points individually.
D-Link Smart WLAN Manager User Manual Installing the Smart WLAN Manager Please do following steps to install the Smart WLAN Manager: Step 1. Insert the CD and execute the “setup.exe” program. The InstallShield Wizard will pop out as below: Step 2. Choose the destination folder you want to install the program and click “Next”.
D-Link Smart WLAN Manager User Manual Step 3. The program will perform the installation automatically. Step 4. Click “Finish” to complete the installation.
D-Link Smart WLAN Manager User Manual Discovering the Switch and AP To launch the Smart WLAN Manager: • Go to the Start Menu • Select Programs • Select D-Link Smart WLAN Manager Click “OK” (There’s no default password).
D-Link Smart WLAN Manager User Manual Launch the web browser on PC, and connect to switch by the IP address found (default password: admin). Make sure the firmware version of DES-1228P is at least 1.20.03. Make sure the SNMP read_write community is “private” (default value) and enable the function.
D-Link Smart WLAN Manager User Manual On the Smart WLAN Manager, choose ToolsàDiscovery Wizard or click the icon “ ”; fill in the Discovery password with the SNMP read_write Community Name “private” , and the IP of switch, then click “OK” In Monitor>Tree, right click the newly found AP and choose “ Save to Database ( will change from “New” to “Online” after added into the database. )” to add the AP into database.
D-Link Smart WLAN Manager User Manual Using the Smart WLAN Manager Understanding the Screen Layout 1. 2. 3. 4. 5. 6. 7. Menu Bar Standard Bar Function Tree Database Columns Status Columns Output Bar Status Bar ○1 Menu Bar ○2 Standard Bar ○3 Function Tree For maximum window view, user can disable the standard bar, output bar, and status bar by selecting the options of View in the menu bar.
D-Link Smart WLAN Manager User Manual Discovering Devices Click the Discovery Wizard icon or choose Tools>Discovery Wizard to discover the devices available on the network. Discovery password - The discovery password needs to be consistent with the SNMP read_write community name Input IP - Enter the IP address of the switch.
D-Link Smart WLAN Manager User Manual Clear Database Click the Clear Database icon or choose SystemàClear all from database to clear all the records saved. Modify the Preference Click the Preference icon or choose Tools>Preference to modify the preference. Global Setting The Global Setting allows you to change the monitoring parameters and the log levels. Interval - The time needs to wait for the next polling. The range is from 10 to 6000 seconds, and default value is 60.
D-Link Smart WLAN Manager User Manual Default Parameters In Default Params users can configure the SSID and security to specific managed AP, or to create a default profile for all new devices by checking the option. Mail Alert In Mail alert user can configure when an event happens, the log message will be sent from certain SMTP (mail) server to specific email address.
D-Link Smart WLAN Manager User Manual Syslog In Syslog user is allowed to set the IP address of syslog server, the level of events to be sent to the syslog server, and when to send out the message The default setting for logs to be recorded are all types (critical, warning, info, and debug).
D-Link Smart WLAN Manager User Manual Modifying the Device Password Click the Device Password Manager icon or to choose ToolsàPassword Manager to modify the device password. User can either change the password individually by selecting the device and click “Modify single”. Or to change all devices at once by clicking “Modify all”.
D-Link Smart WLAN Manager User Manual Modifying the Device System Key Click the Modify All Device System Key icon or to choose ToolsàSystem Key Manager to modify the device system key. User can assign the system key is to examine the validity of the access point. Once the key is configured, it needs to be identical on both access point and wireless switch for normal operation. Backup the Database Click the Backup Database icon or choose SystemàBackup database to save the current database to the PC.
D-Link Smart WLAN Manager User Manual Searching the Switch Click the Switch Discovery Utility icon or choose ToolsàSwitch Discovery Wizard to search the available switch. The Discovery List window shows following information of the switch available: MAC Address - The MAC address of switch IP Address - The IP address of switch Product Name - The model name System Name - The name identifies the switch in the network.
D-Link Smart WLAN Manager User Manual Configure the Wireless System Configure the Wireless Switch In Monitor>AP, choose the view by Tree or topology, and double click the wireless switch you want to change the setting, and the configuration windows will pop up. System Configuration IP Address - Can choose static of dynamic (DHCP) IP address for the wireless switch. When static IP was selected, please manual input IP Address, Subnet Mask and Gateway IP. LLDP - Select Enable or Disable the LLDP function.
D-Link Smart WLAN Manager User Manual Anti-Rogue Configuration Configure the ports you want to enable the anti-rogue function. Once it is enabled on a port, switch will check AP with the system key to determine if the it will be authenticated or denied. Port Mapping Configuration It shows the ports which access points connect to, and their IP addresses.
D-Link Smart WLAN Manager User Manual Configure the Access Point individually In MonitoràAP, double click the AP you want to change the setting, and the configuration windows will pop up. Basic Configuration IP Address - Can choose static of dynamic (DHCP) IP address for the wireless switch. When static IP was selected, please manual input IP Address, Subnet Mask and Gateway IP. Name - User can input the system name for the access point Connection Limit - Maximum number of clients can be connected.
