D-Link Smart WLAN Manager User Manual Wireless Configuration B/G Mode - Select if you want to include both 802.11b and 11g devices (Mixed), or only 802.11b (B_only), 802.11g (G_only) device in the network. Wireless Radio - Select On of Off the radio wave. Wireless Network Name (SSID) - The Service Set Identifier of the wireless network. Channel - Allows you to manually choose a channel. It’s only selectable when Auto Channel Scan is disabled.
D-Link Smart WLAN Manager User Manual WPA2 If you select WEP as the security type, additional columns will appear with following options. Authentication - Select Open System or Shared Key to be used on the network. WEP Encryption - Select the key size (64-bit. 128-bit, or 152-bit). Default Key - Select which defined key is active on the network. WEP-Key - Enter a string as the key. If you select WPA-PSK or WPA2-PSK as the security type, additional columns will appear with following options.
D-Link Smart WLAN Manager User Manual If you select WPA-EAP or WPA2-EAP as the security type, additional columns will appear with following options. Cipher Type - Select TKIP or AES. Radius Server 1 - Enter the IP address, port used, and the secret of the Radius server 1 Radius Server 2 - Enter the IP address, port used, and the secret of the Radius server 2 Advanced Configuration Transmit Data Rates - Select the maximum wireless signal rate of the AP. Default is Auto.
D-Link Smart WLAN Manager User Manual Mac Filter Configuration MAC Address - Add MAC addresses to the MAC Address Control List. Select an entry on the Address Control List and click Delete if you want to remove that Mac address. Disable MAC Filters - Not filtering based on the Mac addresses. Accept MAC Filters listed below to access - When it is selected, only devices with a Mac address in the list are granted access.
D-Link Smart WLAN Manager User Manual Configure the Access Point by Group In Group, user can configure a group template for multiple access points’use. Create a Group Template Click “Add Group” icon ( ) and a window will appear: Enter the group name and choose which APs you want to include in this group. You can also add APs after a group is created.
D-Link Smart WLAN Manager User Manual In the Wireless tab, you can choose if want to enable the Load Balance function, and other options. When configuring load balance, SSID, User Number Limit, Security, and MAC Filter must need to be specified as well. When the load balance is enabled, once the number of clients connect to an AP has reached to the threshold, the new client can only join other APs with connection limits available.
D-Link Smart WLAN Manager User Manual Edit a Group Template Click “Configure Group Template” icon ( ) and an edit window will appear: Note: For detailed explanation for rest of Wireless, Advanced, and MAC Filter functions, please refer to section 3.2.2 through 3.2.4. Click “OK” when you are done. Note: Change a configuration template will cause all APs in the group to reboot.
D-Link Smart WLAN Manager User Manual Delete AP/Template: If you want to remove an AP from the group, or delete a template, just select the AP or template (the entry will be highlighted in gray), and click “Delete Group/AP” icon ( warning message will appear. ); then a Or Show AP Configuration: Click “Show AP Configuration” icon ( display the configuration of selected AP.
D-Link Smart WLAN Manager User Manual Management Monitoring The Monitor function allows user to view the wireless system status. Monitoring AP and Wireless Switch by List In MonitoràAP, user can choose three different views. View by List lists the information of wireless access points in the database column. If a failure happens, the icon will change from online ( ) to failed ( ). Following options are provided: 1.
D-Link Smart WLAN Manager User Manual AP to database. 8. Delete from Database ( ): To delete an AP from database. 9. Customize ( ): Users can change the view by adding/deleting attributes according their needs. 10. Replace: Right click the selected AP and choose “Replace”.
D-Link Smart WLAN Manager User Manual Monitoring AP and Wireless Switch by Tree View by Tree lists down the wireless switch and the access points connect to it in the database column. The information displayed includes System Name, Mac address, IP address, and the physical port in which AP connects to the switch. If a failure happens, the icon will change from online ( or ) to failed ( or ). Following options are provided: 1. Configuration ( ): User can view or modify the selected AP’s configuration 2.
D-Link Smart WLAN Manager User Manual Monitoring AP and Wireless Switch by Topology Choose to view by Topology in MonitoràAP offers user to visualize the status of AP and wireless switch on the floor plan. After importing the map, user can drag the icons to their locations. If a failure happens, the icon will change from online ( ) to failed ( or or ). Following options are provided: 1. Configuration ( ): User can view or modify the selected AP’s configuration. 2.
D-Link Smart WLAN Manager User Manual 8. Load Map ( ): Import the picture file as the floor plan file. The file types supported are BMP, DIB, EMF, GIF, ICO, JPG, and WMF. 9. Remove Map ( ): Remove the current floor plan. 10. Modify Map ( ): User can resize the picture by pixels, and can preview before taking efforts. Rotation can also be done for appropriate view.
D-Link Smart WLAN Manager User Manual Monitoring Clients In MonitoràClient, user can see the status of wireless clients connected. Following options are provided: 1. Filter Type: User can enable the filter to narrow down the database display by various attributes 2. Filter: After the Filter Type is chosen, user can select the specific content.
D-Link Smart WLAN Manager User Manual AP Status and Trouble Shooting Status Normal online AP Changed AP New AP Offline AP Replaced AP DHCP error Anti rogue key error D-Link Corporation List view Tree view Topology view Description/Trouble shooting Remark An AP links and works properly in the network. A known AP which configuration has been changed. You can reload the original setting or save the current setting by: 1. Reload: double click to Reload old configuration, or 2.
D-Link Smart WLAN Manager User Manual Not available Unknown device Switch on line Switch offline New Switch Group apply AP Group not apply 1. Select the all managed system key Error Device 2. All managed device change to same system key 3. Disable the anti rouge function from switch 4. Factory reset the AP and switch WLAN Manager can discover AP successfully but cannot get configuration from AP correctly. Possible problems: 1.
D-Link Smart WLAN Manager User Manual Utilization>AP Users It allows user to see the connected client numbers of an access point. You can select the display type by Hour, Day, or Week. The supported file format for exporting includes CSV and PDF.
D-Link Smart WLAN Manager User Manual UtilizationàAP Traffic It allows user to see the traffic volume of an access point in bytes. You can select the display type by Hour, Day, or Week. The supported file format for exporting includes CSV and PDF.
D-Link Smart WLAN Manager User Manual UtilizationàClient Info. It allows user to see the status history of a wireless client. The supported file format for exporting is CSV.
D-Link Smart WLAN Manager User Manual UtilizationàLoad Balance It allows user to see the status of a load balance group. You can select the display type by Hour, Day, or Week. The supported file format for exporting is CSV.
D-Link Smart WLAN Manager User Manual Firmware Upgrade The Smart WLAN Manager allows user to upgrade multiple devices’firmware all at once. To select a single device, just click on the device you want to select. To select multiple devices, hold down the Ctrl key while clicking on each additional device. To select an entire list, hold down the Shift key, click on the first device and then click on the last device on the list. To upgrade the firmware by following steps: 1.
D-Link Smart WLAN Manager User Manual Log The Smart WLAN Manager offers two kinds of log: Action Log and System Log. User can save logs by using LogàSave Log As, and load a saved log by using LogàOpen Log. LogàClear Log allows user to clear all the records not saved. Action Log records all actions user has made. It allows user to filter the log by Date/Time or Description. In the following example, user chooses the type ”. The “Description”, enters “Group”, and click “ filtered results are shown as below.
D-Link Smart WLAN Manager User Manual APPENDIX Cold Start the AP: Please follow the instructions below to cold start your AP from DES-1228P switch Web UI: 1. Connect to the Switch configuration Web page about PoE port Settings 2. Select the AP connected port at switch, from port and to port and disable the PoE_Enable 3. Press “Apply” button and wait few seconds 4. Select the “From Port” and “To Port” and enable the PoE_Enable and wait about 1 minute 5.
D-Link Smart WLAN Manager User Manual Factory reset Please follow the 2 steps for factory reset: 1. Reset the DWL-3140 AP to its factory default settings. 2. Restore the other devices on your network to their default settings, by pressing the Reset button on the top of the unit. Please note you will lose the current configuration settings by doing so.
D-Link Smart WLAN Manager User Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
D-Link Smart WLAN Manager User Manual Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
