User Manual Part 2

D-Link Smart WLAN Manager User Manual
D-Link Corporation 43
APPENDIX
Cold Start the AP:
Please follow the instructions below to cold start your AP from DES-1228P switch Web UI:
1. Connect to the Switch configuration Web page about PoE port Settings
2. Select the AP connected port at switch, from port and to port and disable the PoE_Enable
3. Press “Apply” button and wait few seconds
4. Select the “From Port” and “To Port” and enable the PoE_Enable and wait about 1 minute
5. Active the WLAN Smart Manager and press start polling from toolbar