User Manual Part 2

D-Link Smart WLAN Manager User Manual
D-Link Corporation 23
If you select WPA-EAP or WPA2-EAP as the security type, additional columns
will appear with following options.
Cipher Type - Select TKIP or AES.
Radius Server 1 - Enter the IP address, port used, and the secret of the Radius
server 1
Radius Server 2 - Enter the IP address, port used, and the secret of the Radius
server 2
Advanced Configuration
Transmit Data Rates - Select the maximum wireless signal rate of the AP. Default
is Auto.
Transmit Power - Select the transmit power of the AP. Default is 100%.
Beacon Interval - Beacon is the packet sent by an AP to synchronize a network.
Specify the interval to send a beacon. Default is 100 micro seconds.
RTS Threshold - The RTS threshold is not recommended to be changed unless
you encounter inconsistent data flow. The default value is 2346.
Fragmentation - Specify the fragmentation threshold that packets exceeding it will
be fragmented. Default is 2346 bytes.
DTIM - DTIM (Delivery Traffic Indication Message) is a countdown informing clients
of the next listening window for broadcast and multicast messages. The default
value is 1.
Preamble Type - Select Short or Long preamble.