D-Link DWM-112 User Manual Table of Contents
D-Link DWM-112 User Manual 1 Worldwide Interoperability for Microwave Access (WiMAX) is the 802.16 networking standard that wirelessly provides high bandwidth at long distances. D-Link DWM-112, with IEEE 802.16e-2005 standard, is a broadband wireless access (BWA) USB adapter. With simple configurations, you can wirelessly access high-speed Internet via the WiMAX base station (BS) of your Internet service provider (ISP) within its coverage area.
Package Contents Features D-Link DWM-112 User Manual Supports IEEE802.16e-2005 Wireless MAN-OFDMA and Wireless HUMAN air interface Visual graphic icon and signal strength for connecting and disconnecting WiMAX Radio on/off function for when traveling on an airplane or any location that prohibits radio usage EAP base authentication for security Computer with: At least one USB 2.0 port Windows XP/Vista WiMAX Utility System Requirements DWM-112 IEEE802.
D-Link DWM-112 User Manual Chapter 2 – Overview Power LED: A steady green light indicates that the WiMAX Adapter is ready for use.
D-Link DWM-112 User Manual Note: User name/Identity Password NAI. (If necessary) Frequency (If necessary) WiMAX WiMAX Before starting installation of the device and utility, make sure that you have the following information obtained from your ISP: Note: Before You Start Hardware Installation 1. Find an open USB port. 2. Insert the DWM-112 into the USB port.
D-Link DWM-112 User Manual Whwn you see the Found New hardware wizard appear,please click cancel. Installing the Utility The WiMAX Utility helps you to configure the settings of the WiMAX adapter. You may need to get the information from your Internet Service Provider (ISP) in order to connect to the Internet with the WiMAX Adapter.
D-Link DWM-112 User Manual Double-click on the Setup.exe file and the installation dialog will then box appear. Click Next to proceed. The Autorun program on the DWM-112 will launch and install the drivers automatically.
D-Link DWM-112 User Manual The process bar indicates that the installation is proceeding. Click Install to start the installation.
D-Link DWM-112 User Manual Click Continne Anyway to continue the installation Chooes a type of wimax BS to customize Settings Chapter 3 – DWM Series WiMAX Utility 8
D-Link DWM-112 User Manual Once, you will see an icon on the taskbar as shown below. Double-click on the D-Link icon to open up the WiMax Utility screen. If you select Launch WiMax Utility, the software will start after clicking Next. If No launch is selected, the software will not automatically start, and you can go to Start > Programs > D-Link > DWM-112 WiMAX Adapater, and select one of the WiMax Utility modes to start.
Use WiMAX Utility – located in the taskbar – to start WiMAX Utility (User mode). D-Link DWM-112 User Manual Steps: 1) Open the page of settings. Select “Add…” and enter a string to add a new operator’s settings.
D-Link DWM-112 User Manual Chapter 3 – DWM Series WiMAX Utility 11
D-Link DWM-112 User Manual 3) Configure authentication settings. Consider to enable or disable authentication. 2) Press “Edit” to configure a set of settings for this operator, like authentication and channel settings.
D-Link DWM-112 User Manual 4) Configure WiMAX channel settings Press “+” to add new channels. In this example, the final outer-identity is {am=1} (Note: 1. WiMAX-decoration and Realm are optional. 2. Identity should not include symbol ‘{‘, ‘}’, or ‘@’). 1234567890@wimax.net Check “Use NAI” if and only if you need to use EAP outer-identity. Press the Edit icon and enter an outer-identity string in the proper field.
D-Link DWM-112 User Manual 5) If your authentication type (like TLLS/MSCHAPv2) needs user name and password, fill them in the page of settings.
D-Link DWM-112 User Manual Open the Scan page to scan WiMAX signals in the current operator’s channel list. 6) Press “Apply” to apply this operator’s settings and start a connection.
to disable the device’s RF functions. to connect or disconnect.
D-Link DWM-112 User Manual Chapter 3 – DWM Series WiMAX Utility 17
D-Link DWM-112 User Manual For Advanced User Chapter 3 – DWM Series WiMAX Utility 18
D-Link DWM-112 User Manual Both WiMAX bandwidth and frame duration are global settings. Click “Log” to open log windows. Contents are saved to 2 log files in the program folder. Log files help developers analyze and debug problems.
D-Link DWM-112 User Manual Input a frequency range and press “Start Scan” to discover new channels. Once a new channel is discovered, you can “Stop Scan” and select it and add it to the operator’s Channel List. Edit -> Channel List -> Explore new channels. This function can help you find out correct frequencies of available WiMAX channels in your environment.
D-Link DWM-112 User Manual For profile 3A, support 5MHz and 10MHz bandwidth Support TDD (Time Division Duplex) mode Support QPSK, 16QAM, 64QAM modulation (DL) Transmit power 23dBm Embedded antenna 2.5GHz radio front-end cover from 2.5GHz to 2.69GHz (NCC Frequencies 2.5025~2.6875GHz) Appendix B – Technical Specifications Device drivers: Windows XP/Vista 21 Support PKMv2 protocol, EAP-based authorization, EAP-TLS, EAP-TTLS. Power USB 2.0 IEEE 802.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. D-Link DWM-112 User Manual This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
D-Link DWM-112 User Manual This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
