Machine Connect 2.0 Quick Installation Guide 1. What’s Included 1) 2) 3) 4) 5) Machine Connect 2.0 (4G LTE Only) device USB cable for power adaptor Power adaptor (indoor type, non-industry grade) 2 units of external antennas RJ45 cable. 1. Machine Connect 2.0 Main Device 1) Machine Connect 2. USB Cable For Power Adaptor 3.
4. External Antenna 5. RJ45 Cable 2. Antenna Information There are 2 units of external antenna with 2 stands; which can be used to adsorb to any metal surface of machines. These antennas can provide Verizon B2, B4 and B13 radio connections. Note: Machine Connect 2.0 requires an antenna to work properly. These two antennas are only for testing purpose. Verizon does not certify them yet. You may also bring your own antenna.
. Attaching the Antennas Securely screw on the antennas: • • You don’t need to figure out the PRI and DIV antenna when using the supplied antennas. This antenna is fined turned to handle the PRI/DIV antenna characteristic. If you want to use your own antennas that are different than to the supplied antennas; then you might need to follow the labeled PRI and labeled DIV for your own antenna.
. Enable your device Contact your Verizon business representative to activate your device on the Verizon Wireless Network by providing IMEI # and ICCID # listed on the back cover of the device. 5. Use Ethernet interface or USB data interface to the Internet For Machine Connect 2.0 device, there are two interfaces that can be used to access the Internet. The first one is the fast Ethernet RJ45 interface, which is driverless for Linux based, and Windows based of host devices.
Figure 4 - WebUI Once you enter the main page, you will see the following figure 5 from RJ45 connection or figure 6 from USB data connection. If your device is connecting to Verizon LTE live network, you will see the LTE signal information in figure 7. You can get the more detail information showing in figure 8 from the “diagnostics” button, (D), in figure 5.
Figure 5 - Machine Connect 2.
Figure 6 - Machine Connect 2.
Figure 8 - Machine Connect 2.0 system status 7. FCC Regulations. 15.21 Information to user. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • Reorient or relocate the receiving antenna.
