Users Manual Part 1

ManualsBrandsD-Link ManualsElectronicsCPE

10D-Link DWR-920V User Manual

Section 3 - Conguration

Connect via Wi-Fi

Note: The following example uses Windows 7’s built-in wireless connection utility. If you are using a dierent operating system, or a third party connection

utility, the process may be dierent. Please refer to the documentation that came with your operating system or wireless client for further information on

how to connect to a wireless network.

To connect to the router using Wi-Fi, open your operating system’s wireless networking utility

and scan for available networks to connect to. By default, the network name (SSID) of the

DWR-920V will be in the format dlink_DWR-920V_xxxx, where “xxxx” represents the last

four characters of the DWR-920V’s MAC address. The default SSID and password can also be

found on the product label attached to the battery cover. For more information on where to

nd this label refer to Hardware Overview on page 4.

Once you have located your DWR-920V’s wireless network, select it and click Connect.

dlink_DWR-920V_xxxx