Section 3 - Configuration Wi-Fi Settings Wi-Fi Status This page displays your current Wi-Fi status and Wi-Fi settings. General Information Wi-Fi WPS Displays whether Wi-Fi Protected Setup (WPS) is enabled and the configuration method used. Wi-Fi 2.4 GHz Displays whether Wi-Fi is enabled. Current Wi-Fi Clients Displays the number of clients connected to your Wi-Fi network. Wi-Fi Status SSID Name Displays the name of your Wi-Fi network. Encryption Displays your current Wi-Fi security encryption mode.
Section 3 - Configuration Wi-Fi Control Wi-Fi 2.4 GHz Wi-Fi 2.4 GHz Toggle the switch to enable/disable Wi-Fi functionality on your router. 802.11 Mode The type of Wi-Fi connection currently being accepted by the router. Select 802.11 N Only for best performance or 802.11 B/G/N Mixed for broadest compatibility. B/G/N Mixed is the default setting. Channel Width The current channel width being used by your router.
Section 3 - Configuration Wi-Fi WPS PBC Push Button Configuration (PBC) enables you to easily connect your devices to the DWR-920V by pushing a PBC button on both devices. Press your device’s PBC button and then click Start Via PBC, to begin the WPS process. Use PIN Mode Move the toggle to enable PIN protection for use with the WPS feature. Note: WPS PIN Mode is disabled by default. This mode is less secure and is not recommended. It is retained in this product for compatibility purposes only.
Section 3 - Configuration Wi-Fi Clients This page shows your current client list and allows you to filter clients by host name, IP address and MAC address. This filtering option enables you to allow or deny access to specific wireless clients. Wi-Fi 2.4 GHz Clients List Host Name A unique name for each wireless client that is connected to your router. IP Address The IP address of the wireless client that is connected to your router. MAC Address The hardware address of the client’s wireless adapter.
Section 3 - Configuration Wi-Fi Security Settings In this page you can view your Wi-Fi security settings, here you can alter things like your SSID name, SSID visibility and access Wi-Fi security features. Wi-Fi 2.4 GHz SSID SSID For Wi-Fi 2.4 GHz Displays the name of your Wi-Fi network. Click in the box to edit. SSID Visibility Click the toggle to change your SSID visibility to clients. Max Client Number The maximum number of clients allowed on your network.
Section 3 - Configuration Cipher Type AES - A newer cipher used by the WPA2 standard. Note: Use of this cipher type is required in order to achieve 802.11n speeds. AES/TKIP - TKIP is an encryption method commonly used by older devices. Select this option for greater compatibility with old and new devices. Pre-Shared Key The pre-shared key is the password which clients require in order to connect to your network. Enter a password of between 8 and 63 characters in length. Click Apply to save changes.
Section 3 - Configuration MAC Filter This page allows you to set MAC filters (Media Access Control) which allow or deny LAN (Local Area Network) computers from accessing the network. A MAC address is a unique ID assigned by the manufacturer for devices that connect to a network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the router. MAC Filter Settings MAC Filter Toggle this switch to enable/disable the MAC filter.
Section 3 - Configuration Applications Short Messages On the Short Messages Settings page you can organize, send and receive Short Message Service (SMS) messages by selecting between a Setup, Inbox and Drafts tab. These messages can either be saved to the router’s internal memory or on the SIM/UICC card itself. Setup Store To Choose between the location to store contact numbers, either on your SIM/UICC card or the DWR-920V device. Current Short The current number of messages received.
Section 3 - Configuration Inbox ID A chronological number given to each message you receive. Delete Check this box to select and delete a message in your inbox. From The SMS sender’s number. Time The time the message was received. Content The SMS message’s content. Add New Click Add New to send a new message. Click Apply to save changes. If you clicked Add New: Send to Enter the phone number of the intended recipient here. Content Type your message content here. Click Send to send your message.
Section 3 - Configuration Drafts ID A chronological number given to each message you save to draft. Delete Check this box to select and delete a message in your drafts folder. To The SMS recipient’s number. Time The time the message was last edited. Content The SMS message’s content. Click Apply to save changes.
Section 3 - Configuration DHCP Setting Here you can disable or enable your router’s DHCP Service, configure the IP address for the DWR-920V, and set the range of IP addresses assigned by the DHCP server. DHCP Service DHCP Service Enable or disable the DHCP Service. IP Address Click on the last digit to alter your router’s current IP address. Subnet The subnet mask that your router is using. IP Range Click on the last digits to alter the range of IP addresses assigned by the DHCP server.
Section 3 - Configuration USSD Unstructured Supplementary Service Data (USSD) allows ISP-specific applications to be activated with an SMS message. USSD USSD Code Enter an application activation code and click the Send button. This will allow you to activate applications by sending an SMS to your ISP.
Section 3 - Configuration Firewall Setting A firewall helps protect your network from external cyber attack and intrusions. This page allows you to alter your router’s firewall settings. Firewall Settings Firewall Enable Clicking this toggle activates the IP Filter. For more information see IP Filter on page 49. DMZ Settings Toggling the DMZ (Demilitarized Zone) will expose a chosen computer to the outside world by completely disabling all firewalls and routing all inbound traffic to the target IP.
Section 3 - Configuration If you selected Firewall Enable: Policy Choose Drop to block all IP addresses defined in the IP Filter section or Accept to only allow those addresses access to your network. If you selected DMZ Settings: DMZ IP Address Enter the IP address of the DMZ. If you selected Access from WAN: Access from WAN Allows the configuration interface to be access over WAN. This setting is not recommended. Click Apply to save changes.
Section 3 - Configuration IP Filter The DWR-920V can filter certain IP addresses and ports. IP filtering allows you to direct specific traffic to a specified local client based on source IP address or protocol. The DWR-920V supports a maximum of 50 filters. ID Delete Protocol Source IP Dest IP Rule ID number given to new IP filters. Click here to select the filters you wish to delete. The protocol for the IP filter rule. The source IP address to be filtered. The destination IP address to be filtered.
Section 3 - Configuration If you selected Add New IP Filter: Add IP Filter Protocol Source IP Select the protocol for ports that you want to allow or deny access to. Choose between TCP, UDP or ICMP or all of the above. Enter the source IP address that you wish to filter. Subnet Enter the subnet mask of the source IP address you wish to filter. Source Port Number Enable this feature if you wish enter a single port or a range of ports to be filtered based on origin.
Section 3 - Configuration Port Forwarding This page will allow you to open a single port or a range of ports to specific IP addresses. The DWR-920V supports a maximum of 50 filters. ID Delete Protocol Destination IP Port ID number given to the new rule. Click here to select the rules you wish to delete. The selected protocol for the IP filter rule. The IP address that will be port forwarded to. The port number that incoming traffic will be forwarded from. Click Add New to add a new port.
Section 3 - Configuration If you selected Add Port Forwarding Add Port Forwarding Destination IP Address The IP address you want to allow port forwarding on. Protocol Select the protocol for ports that you want to allow or deny access to. Choose between TCP, UDP or Other. If you select Other you will be asked to specify the protocol in addition to the ports. Private Port Select the port number or numbers for your service on your local network. Enter a single port or a range.
Section 3 - Configuration System System Information About DWR-920V FW Version The current firmware version of the DWR-920V. Hardware Version The current firmware version of the DWR-920V. IMEI International Mobile Equipment Identity is a unique number assigned to every mobile device. SIM/UICC IMSI The SIM/USIM/UICC card has a unique number called an International Mobile Subscriber Identity (IMSI). This is used to identify and authenticate users on cellular devices.
Section 3 - Configuration Admin Settings Account This tab allows you to customize your own username and password as well as adjust the UI’s automatic logout timer. Username Adjust your login username here. Password Enter your new password here. Confirm Password Confirm the new password here. Auto logout after Click on the drop-down arrow to select the length of time before being automatically logged out of the interface. Click Apply to save your changes.
Section 3 - Configuration Language This tab allows you to change the default language of the router’s web interface. Language Select your desired language here. Click Apply to save your changes.
Section 3 - Configuration Date & Time In this section, you can adjust the date, time, and network time synchronization settings of your router. SNTP Click the toggle to Enable or Disable automatic time synchronization with a Simple Network Time Protocol (SNTP) server. Primary, Enter an SNTP server address which will be used to Secondary and synchronize the router’s time and date. Tertiary SNTP Server Time Zone Select your current Coordinated Universal Time zone (UTC).
Section 3 - Configuration If you disabled automatic synchronization with an SNTP server. Time Zone Select your current Coordinated Universal Time zone (UTC). Date & Time Adjust the dials with your mouse to set the date and time. Selected Date and Time Displays your new adjusted time. Daylight Saving Toggle if your location observes daylight savings. Start Date Enter in the details of when daylight savings begins in your location. End Date Enter in the details of when daylight savings ends in your location.
Section 3 - Configuration Settings Profile Import Profiles In the Import Profiles tab, you can import previously saved settings for the router. Select Browse your computer for previously exported settings. Click Apply Import to proceed.
Section 3 - Configuration Export Profiles In the Export Profiles tab you can export your current configuration to a computer. To Get Current Click the Click Me button to download the current Profile settings of your DWR-920V.
Section 3 - Configuration Reset and Reboot In the Reset and Reboot tab you can reboot your router or reset it to factory default settings. You can also manually reset your router by removing the battery cover and using an implement such as a straightened paperclip to press and hold the reset button on the router for 5 seconds. Reset to Default Select the Reset to Default button to reset the DWR-920V to factory default settings. Reboot Select the Reboot button to reboot the DWR-920V.
Section 3 - Configuration Firmware Upgrade This page allows you to manually upgrade your router’s firmware. Upgrade My Router Upgrade My Router Select Manual to manually upgrade your router’s firmware. To upgrade automatically, select Remote Server from the drop down menu and then click Check Remote Server and follow the on-screen instructions. Open File If you have selected a manual upgrade, select the appropriate file for the upgrade. Current Version The current version of your firmware.
Section 3 - Configuration Network Statistics This page displays the packets transmitted and received by your router. The traffic counter will reset if the device is rebooted. Click the Clear All Data button to refresh the statistics.
Section 3 - Configuration Connecting to a Wireless Network Using Windows 10 When connecting to the DWR-920V wirelessly for the first time, you will need to know the default network name (SSID) and security key (Wi-Fi password) being used. These can be found on a label on the underside of the battery cover. To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it.
Section 3 - Configuration To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the Connect Automatically check box. You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next to connect to the network.
Section 4 - Connecting to a Wireless Network Using Windows 8 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display.
Section 4 - Connecting to a Wireless Network You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. If this is the first time connecting to your router, a unique security key for your router will be displayed on a sticker in the router’s battery bay. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function.
Section 4 - Connecting to a Wireless Network Connecting to a Wireless Network Using Windows 7 Windows 7 users may use the built-in wireless utility to connect to a wireless network. If you are using another company’s utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows 7 utility as seen below.
Section 4 - Connecting to a Wireless Network Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 78 for more information.
Section 4 - Connecting to a Wireless Network Configuring Wireless Encryption It is recommended to enable wireless encryption (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area.
Section 4 - Connecting to a Wireless Network 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. dlink_DWR-920V_xxxx 4. The following window appears while your computer tries to connect to the router.
Section 4 - Connecting to a Wireless Network 5. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or pass phrase must be exactly the same as on the wireless router.
Section 4 - Connecting to a Wireless Network Using Windows Vista™ Windows® Vista™ users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® Vista™ utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility.
Section 4 - Connecting to a Wireless Network Configuring Wireless Encryption It is recommended to enable wireless encryption (WEP/WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows® Vista™ Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2.
Section 4 - Connecting to a Wireless Network 3. Enter the same security key or pass phrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
Section 4 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows® XP Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.
Section 5 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWR-920V. Read the following descriptions if you are having problems. 1. Why can’t I access the web-based configuration utility? When entering the IP address of your router (192.168.0.1 for example), you are not connecting to a website on the Internet nor do you have to be connected to the Internet.
Section 5 - Troubleshooting -- Close your web browser (if open) and re-open it. 2. What can I do if I forgot my password? If you forgot your password, you must reset your router. Please note that this process will change all your settings back to the factory defaults.
Appendix A - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows® Vista™ users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter.
Appendix A - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 8 Click on Start > Control Panel > Network and Internet Connections > Network Connections > Configure your Internet Protocol (IP) settings. Windows® 7 Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.
Appendix B - Technical Specifications Technical Specifications Radio Frequency Bands1 • LTE: Band 4/12/41/66 • DC-HSPA+/HSPA+/HSUPA/HSDPA/WCDMA: B2/B5 Cellular Access2 • • • • • • • LTE up to 150 Mbps Down/50 Mbps Up DC-HSPA+ up to 42 Mbps Up/5.76 Mbps Down HSPA+ up to 21 Mbps Up/ 5.76 Mbps Down HSPA up to 7.2 Mbps/5.76 Mbps Down UMTS up to 384 Kbps Up/384 Kbps Down EDGE up to 237 Kbps Up/118 Kbps Down GPRS up to 85.6 Kbps Up/42.8 Kbps Down Wi-Fi Access Point • 802.11n • 802.11g • 802.
Appendix C - Regulatory Information Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
