User's Manual

43D-Link DWR-925 User Manual
Section 3 - Conguration
Tick this box to enable IPSec VPN function.
Tick this box to receive Netbios from Network Neighborhood.
Some NAT routers will block IPSec packets if it doesn’t support
IPSec passthrough. If you connect to another NAT router which
doesn’t support IPSec passthrough on the WAN side, you need
to activate this option.
Tick this box to enable VPN Statistic options.
The device supports 1~10 tunnels.
Tick this box to enable this features and click More to congure
VPN Dynamic IP on a separate page. Please see the next page
for more details.
Tunnel details are displayed here. Click More to congure a new
tunnel or click Disconnect to disconnect from an existing tunnel.
Select the Enable checkbox to activate this rule.
In tunnel settings page, you can click More under Action for
detailed tunnel settings.
XAUTH account: select it to store XAUTH account information
such as user name and password.
PPTP Client / PPTP Server: DWR-925 can act as either
client or server under PPTP, click it to congure this setting.
L2TP Client / L2TP Server: DWR-925 can act as either
client or server under L2TP, click it to congure this setting.
Click Refresh to view your current settings.
VPN-IPSEC:
Netbios over IPSEC:
NAT Traversal:
VPN Statistic:
Max Number of Tunnels:
VPN Dynamic IP Setting:
Tunnel Settings:
Manual VPN Setup
This section will help you create and congure your VPN settings. The router supports IPSec as the server endpoint. IPSec (Internet Protocol Security)
is a set of protocols dened by the IETF (Internet Engineering Task Force) to provide IP security at the network layer.
10