User's Manual

Getting Started Operation Network
function
Troubleshooting Specifications
Getting Started Network
function
Troubleshooting Specifications
ENGLISH ENGLISH
0 0
PCアプリ PCアプリ
NEXT
ENTER
RC SETUP
LCDボタン
LCDボタン
Registering favorites
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press [FAVORITES].
3
Press [ADD/REDO].
4
Press NEXT.
5
Press [KEY].
b Pages can be added here.
When [PAGE] is selected, press [MAIN] or [DEVICE].
When [MAIN] is selected, press [YES] to set.
When [DEVICE] is selected, select the device for which a
page is to be added.
6
Press NEXT.
7
At the “Assign Favorite” screen, select the
button for the place to be stored in the
favorites.
Favorites settings
Favorites settings
Use this function to register your favorite channel
numbers so they can be operated with a single button.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press [FAVORITES].
3
Press [CONFIGURE].
4
Press NEXT twice.
5
At the “CONFIGURE FAV” screen, press
the LCD button for the item you want to
set.
[FAV DEVICE] :
Press this to select the device to be stored in the favorites.
This is initially set to “SAT”.
[FV IR DELAY] :
Press this to set the interval at which the
remote control
signals are sent when buttons at which favorites have been
registered are pressed.
[TOTAL DIGIT] :
Use this to set the number of digits of channels registered
in the favorites.
[CHANNEL KEY] :
Set this to add ENTER after registered favorites
(Set this for types of devices for which ENTER is pressed to
set the channel after selecting it with the number buttons.)
To add ENTER at the end of the channel, press ENTER. If you
do not want to add ENTER, press NEXT.
b When [EXIT] is pressed, the setting is completed. Press
[CONFIG] to continue registering.
Operation
LCD buttonLCD button
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit