User's Manual
Getting Started Operation Troubleshooting Specifications
Getting Started Operation Network
function
Troubleshooting Specifications
ENGLISH ENGLISH
PCアプリ
PCアプリ
NEXT
RC SETUP
LCDボタン
LCDボタン
Operations using nodes
Adding nodes
Use this procedure to register a node number and add an
RC-7001RCI (sold separately) to the network.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [NETWORK].
3
Press [ADD NODES].
4
Press NEXT.
5
To add the remote control unit to the
network, press [REMOTE].
b To add an RC-7001RCI (sold separately), press [OTHER].
6
Press RESET/CONFIG on the RC-7001RCI
(sold separately) for about 1 second.
The green indicator flashes.
7
Press NEXT twice.
“Success!” is displayed when the device has been
added successfully.
b Press NEXT to return to the settings menu.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [NETWORK].
3
Press [DELETE NODES].
4
Press NEXT twice.
The RC-7001RCI’s (sold separately) node number is
displayed.
5
Select the node number to be deleted, then
press [YES].
4
Press NEXT.
b Press [NO] to end, [YES] to continue.
Deleting nodes
Use this procedure to delete RC-7001RCI (sold
separately) units by specifying the node number from
the current network.
Network
function
LCD buttonLCD button
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit