User's Manual

Getting Started Operation Network
function
Troubleshooting Specifications
Getting Started Operation Troubleshooting Specifications
ENGLISH ENGLISH
 
PCアプリ PCアプリ
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [NETWORK].
3
Press [EDIT LABEL].
4
Press NEXT twice.
The RC-7001RCI’s (sold separately) node number is
displayed.
5
Select the node number to be changed, then
press NEXT.
The edit screen for the selected node appears.
6
At the “Edit Text” screen, use the rst
column of LCD buttons to select the position
of the character to be edited.
7
Select the character to be input with the
second column of LCD buttons, then press
[SELECT].
b Lower case letters are input when [CAPS] is displayed,
capital letters when [lower] is displayed.
8
Press [SAVE].
9
Press NEXT.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Changing node labels
Use this procedure to add labels to RC-7001RCIs (sold
separately) for easier distinction.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [NETWORK].
3
Press [VIEW NODES].
4
Press NEXT twice.
The node numbers of the RC-7001RCIs (sold separately)
registered on the network are indicated with an
z
mark
after them.
b Press NEXT twice to return to the settings menu.
Viewing nodes
Use this procedure to search for and display a list of RC-
7001RCIs (sold separately) registered in the network.
NEXT
RC SETUP
LCDボタン
LCDボタン
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit
Network
function
LCD buttonLCD button