User's Manual

 
7%$N"
 
*3065
 
AV
SURROUND
RECEIVER
IR blaster
(sold
separately)
AC 100V, 50/60Hz 100V, 50/60Hz
ROOM1
ROOM2 ROOM3
RC-1
(RC-7000CI
sold separately)
RC-2
(RC-7000CI
sold separately)
RC-3
(RC-7000CI
sold separately)
Repeater 1
(RC-7001RCI)
ZONE2
OUT
ZONE3 OUT
Operation
• The maximum distance between repeaters is 30 meters.
To check whether the remote control unit recognizes the
repeater or not, check “Viewing nodes”(vpage24) in the
RC-7000CI’s owner’s manual.
• The number of remote control units and repeaters that can
be registered in the network settings is 16. When using both
remote control units and repeaters, the maximum number is
20 units all together. It is not possible to register more than
20 units.
NOTE
Using a wireless LAN near a microwave oven may reduce
signal transfer performance. If so, either change the channel
or move about 5 meters away.
Connections
Repeater 2
(RC-7001RCI)
Repeater 3
(RC-7001RCI)
1
Connect the AC adapter.
The communications indicator lights red.
b If the indicator does not light, press the set button for at
least 10 seconds to reset.
2
After preparing the RC-7000CI, press the
set button and release it immediately.
The communications indicator lights red.
Making the network settings
3
Once the settings are complete, the
communications indicator lights green.
b It may take up to about 60 seconds for the settings to be
completed.