User's Manual
Troubleshooting
1. If a problem should arise, first check the following:
2. Is the set being operated as described in the operating instructions ?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a
malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
Symptom Cause Countermeasure Page
Power does not turn on • AC adapter is not properly connected. • Connect securely. 3
Remote control unit does
not operate properly when
connected to a device
equipped with an RS-232C
terminal.
• RS-232C terminal is not properly
connected.
• Network settings are not correct.
• Connect securely.
• Check that the communications
indicator is lit green. If not, press
the set button at least 00 seconds to
reset.
3
3
Specifications
Power supply: AC 100V, 50/60Hz (Dedicated AC adapter)
Power consumption: 00 W
周波数: 2045MHz~2480MHz(16ch)、帯域
幅2MHz
変調方式: O-QPSK
拡散方式: DSSS
通信距離: 30m(環境によって変わります。)
Maximum external dimensions:
100 (W) x 77 (H) x 32 (D) mm (3-15/16” x 3-1/32” x 1-17/63”)
Mass: 80 g (Approx 2.82 oz)
Terminal: RS-232C terminalx1 IR output terminalx4