User manual

16
Enhancement level.
 Select „HLC‟ to adjust the HLC MASK TONE and LEVEL.
☞ Notes
MOTION DET.
This product has a feature that allows you to observe movements of objects in 8 different
areas on the screen, and the words „MOTION DETECTED‟ appear on the screen when
movement is detected; hence a single individual can conduct supervision efficiently. The
camera detects an object‟s movement by sensing disparity of outline, and level of
brightness and color. The camera receives detection signal from MD output terminal.
1. Please position the arrow to point to „MOTION DET‟ on the SETUP menu. Using the UP
and DOWN buttons.
 Since the following symptoms may occur according to the ambient illumination when BLC is
selected, set it to OFF.
○
1 Color or screen changes unnaturally.
○
2 Noise appears in the bright part of the screen.
 Since the performance of the BLC function may be affected by the area of the bright part of the
screen, optimize the installation angle for the best BLC performance.
 If you increase LIMIT, the screen display may be distorted.
 For high performance of BLC function, We recommend that you set IRIS to AUTO in the EXPOSURE
setup.
 Activating BLC may cause the camera to repeat the Auto Focus operation depending on lighting
conditions. It is recommended that you use Focus Setup menu in One-Push or manual mode.
 Smart Zoom and BLC cannot be used in conjunction with each other.
 Setting up BLC and then Smart Zoom automatically cancels BLC.
 Setting up Smart Zoom and then BLC automatically cancels Smart Zoom.