Digital Day & Night COLOR DOME CAMERA USER MANUAL
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER WERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency 1. Features 4 manual, may cause harmful interference to radio communications. 2. Components 6 Operation of this equipment in a residential area is likely to cause 3.
1. Features Horizontal Resolution 530 TVLines Clear image quality has been achieved by employing a SONY CCD with 410,000(effective) pixels, which provides a horizontal resolution of 530 TV lines. High Sensitivity The built-in high sensitivity SONY COLOR CCD enables a clear image even in 0.3Lux(0.1Lux B/W) or as low as 0.002Lux with SENS-UP. DAY & NIGHT This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions.
2. Precaution 6 Do not install the camera in extreme temperature conditions. Do not install or use the camera in an environment where the humidity is high Only use the camera nuder conditions where temperatures are between -10 and 50 . Be especially careful to provide ventilation when operating under high temperatures. Only use the camera nuder conditions where temperatures are between -10 and 50 . Be especially careful to provide ventilation when operating under high temperatures.
3. Names and Functions of Parts 1) Names of Parts - SETUP button : Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. - UP & DOWN buttons : Used for selecting items by moving the cursor up or down on the menu screen. - LEFT & RIGHT buttons : Used when changing item values, by moving the cursor to the left or right on the menu screen.
4. Camera operation 1) LENS This function is used to adjust the brightness of the screen. SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC DNR SENS-UP SPECIAL EXIT MNUAL ESC ATM OFF LOW LOW OFF - Please select the type of the manual lens. RIGHT button. - FLK : Please select 'FLK' mode when flickering occurs on the screen, due to an imbalance between illumination and frequency. (NTSC Model : 1/100, PAL Model : 1/120) - ESC : Auto control of the shutter speed can be achieved.
Please select one of the 3 modes below. - ATW(Auto Tracking White Balance) : This mode can be used within the color temperature range 1,800 K ~ 10,500 K (eg, fluorescent light, outdoor, sodium vapor lamp or inside tunnels) - AWC(Auto White Balance Control) : Please press the SETUP button while the camera is directed at a piece of white paper to obtain the optimum state under current illumination. If the environment including the light source is changed you have to adjust the white balance again.
5) AGC (AUTO GAIN CONTROL) SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC DNR SENS-UP SPECIAL EXIT MNUAL ESC ATM OFF LOW LOW OFF - Please position the arrow to point to 'AGC' on the SETUP menu by using the UP and DOWN buttons. - Please select the mode you wish to operate by pressing the LEFT or RIGHT button. As the level of gain increases, the screen gets brighter and the level of noise also increases. HIGH : The gain increases or decreases within the range of 6dB ~ 42dB.
LEFT or RIGHT button. - Please press the SETUP button when all the settings are complete. - The maximum storage magnification in low light level movement situations can be adjusted by pressing the SETUP button in 'AUTO' mode.(X2~X128) - As the magnification increases, the screen gets brighter; however the after image also increases - If storage magnification is increased while SENS UP is operating, it may cause noise, and spots may appear; however this is normal.
- Please press the SETUP button. Camera ID ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz -. 0123456789 CLR POS END ------------------------- - Please repeat the above to input the ID. When a name has been chosen, please select a position for the name display. - Please move the cursor onto 'POS' and then press the SETUP button. Camera ID Up to 15 letters can be used for the ID. - Please move the cursor to the letter you wish to choose by using the UP and DOWN button.
- Please find the position you wish to display the name by using the 4 directional buttons, and then press the SETUP button. - When the AGC is turned off, COLOR does not operate. - When an infrared light is used, there may be a problem with focusing. SYNC This model are only available INTERNAL. - Please select 'END' and then press the SETUP button to complete ID input.
AREA SEL mode. - Please select ON mode for the chosen area. - Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button. - Please adjust the level of observation by using SENSITIVITY mode. PRIVACY AREA SEL AREA4 AREA STATE OFF TOP 60 LEFT 47 RIGHT PRIVACY SPECIAL CAMERA ID COLOR SYNC MOTION DET PRIVACY MIRROR SHARPNESS RESET RETURN 22 OFF ON INT OFF OFF OFF ON This mode conceals the areas you do not wish to appear on the screen.
5. Troubleshooting SHARPNESS SPECIAL CAMERA ID COLOR SYNC MOTION DET PRIVACY MIRROR SHARPNESS RESET RETURN OFF ON INT OFF OFF OFF ON The outline of the video image becomes cleaner and more distinctive as the level of SHARPNESS increases. If the level goes up excessively, however, it may affect the video image and generate noise. If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from.
Problems Troubleshooting 6. Specifications Please check if 'MOTION DETECTION' mode is The MOTION turned on. COLOR mode is not Please check if the AGC menu is set to the OFF working. position. Please check if the AGC menu is set to the OFF SIGNAL SYSTEM TOTAL / EFFECTIVE PIXEL IMAGE SENSOR HORIZONTAL RESOLUTION MINIMUM ILLUMINATION DAY & NIGHT OSD LENS DNR SENS-UP MOTION DETECTION LUMINANCE S/N RATIO SYNC. SYSTEM WHITE BALANCE BLC CONTROL MIRROR SENS-UP function is position.
DISTRIBUTED BY
