User manual

- Please position the arrow to point to
'DNR' on the SETUP menu by using the
UP and DOWN buttons.
- Please select the mode you wish to
operate by pressing the LEFT or RIGHT
button.
OFF : There is no reduction in noise level.
LOW : There is a small reduction in noise level with almost no
ghost image.
MIDDLE : The most effective mode. There is a sufficient reduction
in noise levels without causing much ghost imaging.
HIGH : The level of noise is reduced greatly, however there is an
increase in ghost imaging.
7) SENS UP
SENS UP helps maintain a bright, clear screen image by
automatically detecting changes in the level of light in low light level
conditions
- Please position the arrow to point to 'SENS UP' on the SETUP
menu by using the UP and DOWN buttons.
- Please select the mode you wish to operate by pressing the
5) AGC (AUTO GAIN CONTROL)
- Please position the arrow to point to
'AGC' on the SETUP menu by using the
UP and DOWN buttons.
- Please select the mode you wish to
operate by pressing the LEFT or RIGHT
button. As the level of gain increases, the
screen gets brighter and the level of
noise also increases.
HIGH : The gain increases or decreases within the range of 6dB ~
42dB.
MIDDLE : The gain increases or decreases within the range of
6dB ~ 30dB.
LOW : The gain increases or decreases within the range of 6dB ~
18dB.
OFF : The gain is fixed at 6dB.
6) DNR
The background noise in the low light level decreases
automatically as the level of gain changes.
14 15
SETUP
LENS MNUAL
SHUTTER ESC
WHITE BAL ATM
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT
SETUP
LENS MNUAL
SHUTTER ESC
WHITE BAL ATM
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT