Digital Day & Night Color Dome Camera 사용 설명서 MANUAL 용 서 DCC-601DV
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
■ Warning The camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be caused. Do not Install the camera on a surface that can not support it. Unless the surface is suitable, it could cause falling or other hazards. Do not hold plug with wet hands. It could cause an electric shock. Do not disassemble the camera.
■ Precautions 4
■ Contents --------------------------------- 7 --------------------------------- 8 --------------------------------- 9 --------------------------------- 10 --------------------------------- 11 --------------------------------- 25 --------------------------------- 26 1.Features 2. Components & Cable Connection 3. Names and functions of parts 4. Installation & Dimension 5. Setup Menu Operation 6. Troubleshooting 7.
1. Features ☺Horizontal Resolution 560 TVLines Clear image quality has been achieved by employing a SONY CCD with 410,000 (effective) pixels, which provides a horizontal resolution of 560 TV lines. ☺True DAY & NIGHT This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions. The COLOR mode operates in daytime conditions to provide optimum colors, and BW mode operates in nighttime conditions to enhance the definition of the image.
2.
3. Names and Functions of Parts 1) Names 2) Functions ① 3AXIS BRACKET - Please loosen screws and fix tilted and panned position. ③ LENS : Vari-Focal Auto Iris Lens ③ OSD PCB - SETUP button : Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. - UP & DOWN buttons : Used for selecting items by moving the cursor up or down on the menu screen.
4.
5. Setup Menu Operation 1) Menu Structure SETUP MENU 1. LENS • DC • VIDEO • MANUAL 2. EXPOSURE • SHUTTER • AGC • SENS-UP • RETURN 3. WHITE BAL ATW • ATW • MANUAL • AWC SET • OUTDOOR • INDOOR 4. BACKLIGHT OFF • OFF • WDR • BLC 5. DNR ON • ON • OFF 6. DAY/NIGHT AUTO • COLOR • B/W • AUTO • EXTERN 7. IMAGE ADJ 8. SPECIAL • FREEZ • V-REV • H-REV • D-ZOOM • SHARPNESS • RETURN • CAMTITLE • SYNC • MOTION DET • PRIVACY • DIS • COMM ADJ • LANGUAGE • RESET • RETURN 9.
● Manual : Select Manual Lens ② Exposure 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so that the arrow indicates EXPOSURE . 2. Select a desired mode using the Up and Down buttons. ● SHUTTER: You can select either auto or manual shutter. - A.FLK: Select this when you experience picture flicker, which can happen when there is a clash with the frequency of the installed lighting. - ESC: Select this to control the shutter speed automatically.
☞Note • To produce better results with A.FLK, do not use it in conjunction with the WDR mode of the BACKLIGHT menu. • When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing the installation position. • ESC and MANUAL modes are only available together when the lens is set to MANUAL. • When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and Down buttons so that the arrow indicates ‘White Bal.’ . 2. Select a desired mode using the Up and Down buttons. ※ Select one of the following 5 modes, as appropriate for your purpose. ● ATW : Select this when the color temperature is between 1800°K and 10500°K ● INDOOR : Select this when the color temperature is between 4500°K and 8500°K.
④ Backlight This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, unlike conventional cameras, by adopting a proprietary SV-IV DSP chip. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up and Down buttons so that the arrow indicates BACKLIGHT. 2. Select a desired mode using the Left and Right buttons depending on the camera purpose.
• Select ‘BLC’ to adjust the area to be enhanced by the WDR function. ☞ Note • You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’ menu is selected. • Since the following symptoms may occur according to the ambient illumination when WDR is selected, set it to OFF. - Color or screen changes unnaturally. - Noise appears in the bright part of the screen.
☞Note • You cannot set the DNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’. • When adjusting the noise reduction level of the DNR mode, remember that the higher the level set, the more the noise level will be reduced but that after image may also occur. ⑥ DAY/NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates DAY/NIGHT . 2.
● EXTERN: This mode allows you to apply a desired filter to external signals. ☞ Note • When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. • You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’. At this time, the exchange between DAY mode and NIGHT mode operates as like selecting ‘COLOR’ mode. • The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable camera operation.
● FREEZE : You can view still or moving pictures. ● V-REV : You can flip the picture vertically on the screen. ● H-REV : You can flip the picture horizontally on the screen. ● D-ZOOM : You can use a digital zoom of x1~x10. ● SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture. ● RETURN : Select this to save the settings for the IMAGE ADJ. menu and to return to the SETUP menu.
1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates IMAGE ADJ. 2. Select a desired mode using the Up and Down buttons. ● CAM TITLE : If you enter a title, the title will appear on the monitor. ① If the SPECIAL menu screen is displayed, use the Up and Down buttons so that the arrow indicates ‘CAM TITLE’. ② Set it to ‘ON’ by using the Left and Right buttons.
☞Note • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one. ③ Press the SET button. ④ Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET button. Repeat this to enter multiple letters. You can enter up to 15 letters. ☞Note • If you move the cursor to CLR and press the SET button, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the SET button.
● SYNC : In areas where the supply is at 60Hz, you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator. - INT : Internal Synchronization Type - L/L : Power Synchronization Type, Line-lock • Press the SET button. • You can select a desired phase between 0 and 359. ☞Note • When using AC power at 60Hz frequency, you can use the L/L type synchronization. • When the power is DC 12V, the SYNC.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used. - YPOS : Determines the coordinate of the vertical axis for SEL POS. - XPOS : Determines the coordinate of the horizontal axis for SEL POS. - FILL→SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is sequentially selected as brown, orange, blue, cyan, yellowish green, yellow and red. - RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits. - RET PKT : Determines whether to send a command back to the controller device when a communication control command is sent to the camera. - DISP CAM ID : Display camera title on top left corner of the screen. ● LANGUAGE : You can select the menu language according to your requirements. ● RESET : Resets the camera settings to the factory defaults. ● RETURN : Select this to save the SPECIAL menu settings and return to the SPECIAL menu.
Troubleshooting If 6. there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Nothing appears on the screen. Troubleshooting • Please check the power connection. • Please check the video signal line connection. • Please check and make sure that the auto lens switch is set to DC (VIDEO) when using a VIDEO(DC) lens. The video image is not clear. • Please check if the lens is clean.
7. Specifications SIGNAL SYSTEM TOTAL / EFFECTIVE PIXEL IMAGE SENSOR HORIZONTAL RESOLUTION MINIMUM ILLUMINATION DAY & NIGHT NTSC PAL 410K / 380K Pixels 470K / 440K Pixels Diagonal 6mm (1/3") Sony DS CCD Color : 560 TV Lines↑ B/W : 700 TV Lines↑ 0.3Lux(Color), 0.03Lux(BW), 0.00004Lux (Sense-upX256) COLOR / Black& White/AUTO/EXT OSD Available 4 ~ 9 mm DC Auto Iris Lens LENS 2.9 ~ 12 mm DC Auto Iris Lens 3.8 ~ 9.