User manual

2) HOW TO CHANGE PROTOCOL
Set up this part.
The switch that selects Protocol. The switch that selects Baud Rate.
.
Change No.3 at S2 to INIT if want to change Protocol.
① Please make Power off.
② Switch Protocol that wants to change on as above table.
③ Make Power on, then set Protocol and Baud rate are appealed.
④ Make Power off, if every setting is right. Then it is done.
⑤ Change No.3 of S2 to ADDR before Power on, then make Power on after setting the
address of the camera.
⑥ Try it again with the information as above the table, if something is wrong.