User manual

⑤ Tour SET Group: User can set continual Group motion that can be put 12 Groups in 1 Tour
Move to the setting page if user presses F/F key on this menu
■ The Group user wants to set must be set firstly
※Setting is only possible when Preset is set first in the state of setting of Swing, Group, Tour,
otherwise, it displays the message “Sorry Undefined”.
⑥ Run Function: Operate one of SWING/ ＊Set / Stop order with a control keyboard without
menu GROUP / TOUR / TRACE. (It is operated on the screen. automatically after end of OSD
menu)
■ User can look at how to set TRACE at TRACE SET PAGE”
⑦ RETURN MENU PAGE: Move to a higher menu page when control the joystick Right/Left in
the selection of this menu.
21. TRACE SET PAGE
Set TRACE.
User can regenerate and save a change of the
unrestricted location of ZOOM In/Out and a
position of the camera by hand-worked control with
a joystick.
User can see the screen when moves the joystick
to Right/Left after fixing the cursor on the menu
■ How to set TRACE
Press F/N button to select “SET” mode → move
camera by using joystick toward position you want
up to for 180/sec → after finishing all work, move
cursor to save mode → press F/N button
- DELETE
All saved position will be deleted completely.
◄◄ CAMERA SETUP p3►►
18. Select Alarm : Sensor
19. Motion Detection : Off
20. Preset Set & Run Page
21.Trace Set Page
22. Alarm CH On/Off Page
23. Alarm Preset Set Page
24. Privacy Zone Set Page
- PREV MENU PAGE
- NEXT MENU PAGE